跳转到主内容

简介

The blades and seal ring are responsible for the spinning on your device. This guide will instruct you on how to replace the Blades and Seal Ring.

  1. First, remove the blender container from the blender base by grabbing the container and lifting it up.
    • First, remove the blender container from the blender base by grabbing the container and lifting it up.

  2. Flip the container, where the bottom faces you.
    • Flip the container, where the bottom faces you.

    • Then, rotate the bottom piece counter-clockwise to remove it from the container.

  3. Carefully remove the bottom piece from the container.
    • Carefully remove the bottom piece from the container.

    • Be careful while removing the blades from the container, as seeing they are very sharp and can hurt you.

  4. Now, your container and blades are separated.
    • Now, your container and blades are separated.

结论

To reassemble your device, follow these instructions in reverse order.

Farhan

于2017年09月20日注册

101 信誉积分

撰写一个指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 10

总计 119