跳转到主内容

简介

Motherboard Replacement guide for Oral-B White Pro 1000 rechargeable electric toothbrush due to faulty operation. This guide illustrates the disassembly of the Oral-B White Pro 1000 electric toothbrush. Use caution not to short the positive (+) and negative (-) terminals when handling the battery. This guide also requires the use of a soldering tool which reaches high temperatures. Refer to this helpful guide for some great soldering and desoldering tips.

  1. Oral-B White Pro 1000 Motherboard Replacement, Motherboard: 步骤 1 中的图像 1,1
    • Remove the brush head by pulling the top away from the base.

  2. Oral-B White Pro 1000 Motherboard Replacement: 步骤 2 中的图像 1,3 Oral-B White Pro 1000 Motherboard Replacement: 步骤 2 中的图像 2,3 Oral-B White Pro 1000 Motherboard Replacement: 步骤 2 中的图像 3,3
    • Pry open the end cap from the toothbrush body.

    • Remove the spring.

  3. Oral-B White Pro 1000 Motherboard Replacement: 步骤 3 中的图像 1,2 Oral-B White Pro 1000 Motherboard Replacement: 步骤 3 中的图像 2,2
    • Apply pressure on the brush shaft to release the toothbrush internals.

    • Remove the internals through the bottom of the toothbrush body.

  4. Oral-B White Pro 1000 Motherboard Replacement: 步骤 4 中的图像 1,2 Oral-B White Pro 1000 Motherboard Replacement: 步骤 4 中的图像 2,2
    • Use flat head screwdriver to remove power button pressure plate.

  5. Oral-B White Pro 1000 Motherboard Replacement: 步骤 5 中的图像 1,3 Oral-B White Pro 1000 Motherboard Replacement: 步骤 5 中的图像 2,3 Oral-B White Pro 1000 Motherboard Replacement: 步骤 5 中的图像 3,3
    • Desolder the coil wire from the motherboard.

    • Check out this helpful guide for some soldering and desoldering tips.

    • Squeeze and remove coil from motherboard.

  6. Oral-B White Pro 1000 Motherboard Replacement: 步骤 6 中的图像 1,2 Oral-B White Pro 1000 Motherboard Replacement: 步骤 6 中的图像 2,2
    • Desolder the motor from motherboard.

    • Remove motherboard and battery from body of toothbrush internals.

  7. Oral-B White Pro 1000 Motherboard Replacement: 步骤 7 中的图像 1,2 Oral-B White Pro 1000 Motherboard Replacement: 步骤 7 中的图像 2,2
    • Desolder the battery connections from the motherboard.

    • Remove motherboard from battery holder.

结论

Reattach new motherboard and reassemble your device following instructions in reverse order. Solder appropriate connections during reassembly.

2等其他人完成本指南。

Hannah Parker

于2017年11月08日注册

194 声望

撰写一个指南

团队

IUPUI, Team S5-G4, Baechle Fall 2017 IUPUI, Team S5-G4, Baechle Fall 2017 的会员

IUPUI-BAECHLE-F17S5G4

3 名成员

创作了6篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 4

过去 7 天: 15

过去 30 天: 74

总计 1,693