修复你的物品 社区 商店

Oral-B Vitality Battery Replacement

简介

Electric toothbrushes are powered by a rechargeable battery, that enables the reciprocating brushing motion of the bristles. If your electric toothbrush loses power quickly or doesn't hold charge, most likely the rechargeable battery needs to be replaced.

你所需要的

  1. Oral-B Vitality Battery Replacement, Battery: 步骤 1 中的图像 1，3 Oral-B Vitality Battery Replacement, Battery: 步骤 1 中的图像 2，3 Oral-B Vitality Battery Replacement, Battery: 步骤 1 中的图像 3，3

    • Pull off head, and use pliers to remove the white cap. Pull out the circuit core.

    编辑

  2. Oral-B Vitality Battery Replacement: 步骤 2 中的图像 1，2 Oral-B Vitality Battery Replacement: 步骤 2 中的图像 2，2

    • De-solder in these four (4) locations.

    • The two (2) motor connections

    • The Positive (+) side of the battery

    • The Negative (-) side of the battery

    编辑

  3. Oral-B Vitality Battery Replacement: 步骤 3 中的图像 1，2 Oral-B Vitality Battery Replacement: 步骤 3 中的图像 2，2

    • De-Solder lower battery connection terminal. Bend back battery terminal to clear circuit board.

    编辑

  5. Oral-B Vitality Battery Replacement: 步骤 4 中的图像 1，1

    • De-Solder the three (3) upper terminals from the circuit board.

    编辑

  6. Oral-B Vitality Battery Replacement: 步骤 5 中的图像 1，1

    • Use plastic prying tools to carefully pry off the circuit board. (Utilize metal spedger as a last resort)

    • There is a white tab that goes through the board, be careful when removing the circuit board.

    编辑

  7. Oral-B Vitality Battery Replacement: 步骤 6 中的图像 1，2 Oral-B Vitality Battery Replacement: 步骤 6 中的图像 2，2

    • Pull the circuit board and battery assembly out. Then proceed to remove the battery from the circuit board

    编辑

  8. Oral-B Vitality Battery Replacement: 步骤 7 中的图像 1，1

    • When re-installing battery, remember to bend down lower terminal. And the negative (-) terminal is closest to the copper wires

    • Ensure you recharge the toothbrush after the repair. Even if the replacement battery is already fully charged, the toothbrush will fail to power on if you don’t recharge the toothbrush.

    编辑
结论

To reassemble your device, follow these instructions in reverse order. Remember to apply just enough solder to re-attach the terminals.

17等其他人完成本指南。

作者

与7其他贡献者

Miles Gunty

于11/07/17注册

540 声望

撰写一个指南

徽章: 10

+ 7更多徽章

团队

IUPUI, Team S2-G1, Harley Fall 2017 IUPUI, Team S2-G1, Harley Fall 2017 的会员

IUPUI-HARLEY-F17S2G1

3 名成员

创作了9篇指南

9条评论

This is very easy to do. I had no problems following your instructions.

Ian Bowker - 回复

Thanks.

Is this a regular rechargeable AA?

Thanks again.

Stephen Shaw - 回复

The original battery is a NiCd with tabs. I just spot welded tabs onto a standard AA NiMH battery and it worked fine.

T C -

Thanks.

I did fix an Oral B Braun PRO timer (2022) and the only part that is different is the head. It has two nail presses inside, one at the switch side and the other at the opposite side, that are very difficult to lose.

Peter M. - 回复

添加评论

浏览统计数据:

过去 24 小时： 31

过去 7 天： 185

过去 30 天： 727

总计 51,799