Optical Drive Enclosure Faceplate - iFixit 维修指南

本指南有最近更改，您可查看未经巡查的最新版本。

简介

Pre-req for removing the faceplate from Optical Bay Enclosures #78, 79, 80

你所需要的

步骤 1 Optical Drive Enclosure Faceplate

Optical Drive Enclosure Faceplate, Optical Drive Enclosure Faceplate: 步骤 1 中的图像 1，1

Remove the three 3.0 mm Phillips screws from the optical bay enclosure.

步骤 2

Optical Drive Enclosure Faceplate: 步骤 2 中的图像 1，3

Optical Drive Enclosure Faceplate: 步骤 2 中的图像 2，3

Optical Drive Enclosure Faceplate: 步骤 2 中的图像 3，3

Starting from the left edge, gently pull open the optical bay enclosure.
Continue to pull open the two halves of the enclosure until they separate.

步骤 3

Optical Drive Enclosure Faceplate: 步骤 3 中的图像 1，1

Remove the two 3.0 mm Phillips screws securing the faceplate to the optical bay enclosure.

步骤 4

Optical Drive Enclosure Faceplate: 步骤 4 中的图像 1，3

Optical Drive Enclosure Faceplate: 步骤 4 中的图像 2，3

Optical Drive Enclosure Faceplate: 步骤 4 中的图像 3，3

Lift the black plastic faceplate out of the optical bay enclosure.
You will no longer need the faceplate or the two Phillips screws that held it in place. Set those parts aside if you ever wish to put the faceplate back into the enclosure.
Reassemble the optical bay enclosure without the faceplate, reusing the original three 3.0 mm Phillips screws to keep it intact.

结论

To reassemble your device, follow these instructions in reverse order.

作者

与6其他贡献者

Brittany McCrigler

于03/05/12注册

89,014 声望

创作了131篇指南

+ 45更多徽章

团队

iFixit iFixit 的会员

Staff

135 名成员

创作了16,817篇指南

0条评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 0

总计 724