跳转到主内容

简介

First step in most Mac Pro (Early 2008) guides. Opening the Computer.

配件

没有特定配件。

  1. Shut down the computer. Warning: Always shut down the computer before opening it to avoid damaging its internal components or the components you are installing. Do not open the computer or attempt to install items inside it while it is on.
    • Shut down the computer.

    • Warning: Always shut down the computer before opening it to avoid damaging its internal components or the components you are installing. Do not open the computer or attempt to install items inside it while it is on.

    • Wait 5 to 10 minutes to allow the computer’s internal components to cool.

    • Warning: After you shut down the system, the internal components can be very hot. You must let the computer cool down before continuing.

    • Unplug all external cables from the computer except the power cord.

    • Touch the metal PCI access covers on the back of the computer to discharge any static electricity from your body.

    • Unplug the power cord.

    • Put on an ESD wrist strap.

  2. Apple Watch 套装

    Screen and battery repairs just got easier.

    现在开始购物

    Apple Watch 套装

    Screen and battery repairs just got easier.

    现在开始购物
  3. 1) Hold the side access panel and lift the latch on the back of the computer.
    • 1) Hold the side access panel and lift the latch on the back of the computer.

    • Warning: The edges of the access panel and the enclosure can be sharp. Be very careful when handling them.

    • 2) Remove the access panel and place it on a flat surface covered by a soft, clean cloth.

    • Replacement Note: Make sure the latch is in the up position before replacing the access panel. If the latch is down, the access panel will not seat correctly in the enclosure.

结论

To reassemble your device, follow these instructions in reverse order.

9等其他人完成本指南。

Joshua Byrne

于2013年05月03日注册

5,993 信誉积分

创作了10篇指南

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 10

过去的30天: 49

总计 6,611