修复你的物品 社区 商店

One Education Infinity:One Dock Contact Assembly Replacement

简介

This guide will detail how to replace the circuit board that connects the tablet top with the keyboard base. If the base fails to connect to the tablet replacing this circuit board might solve the problem.

你所需要的

  1. One Education Infinity:One Dock Contact Assembly Replacement, Battery: 步骤 1 中的图像 1，2 One Education Infinity:One Dock Contact Assembly Replacement, Battery: 步骤 1 中的图像 2，2

    • Use a spudger to disconnect the black bundled cable connector from the motherboard.

    编辑

  2. One Education Infinity:One Dock Contact Assembly Replacement: 步骤 2 中的图像 1，3 One Education Infinity:One Dock Contact Assembly Replacement: 步骤 2 中的图像 2，3 One Education Infinity:One Dock Contact Assembly Replacement: 步骤 2 中的图像 3，3

    • Use a spudger to lift the black tab on top of the ZIF connector.

    • Slide the ribbon cable out of the connector.

    编辑

  3. One Education Infinity:One Dock Contact Assembly Replacement: 步骤 3 中的图像 1，3 One Education Infinity:One Dock Contact Assembly Replacement: 步骤 3 中的图像 2，3 One Education Infinity:One Dock Contact Assembly Replacement: 步骤 3 中的图像 3，3

    • Use a spudger to flip up the black retaining flap on the ZIF connector.

    • Pull the folded ribbon cable straight out of the connector.

    • This ribbon cable must be disconnected before removing the battery because it is attached to the battery with adhesive.

    编辑

  5. One Education Infinity:One Dock Contact Assembly Replacement: 步骤 4 中的图像 1，1

    • Use a spudger to pry the battery away from the device.

    • Always use ESD safe tools when working with delicate electrical components.

    编辑

  6. One Education Infinity:One Dock Contact Assembly Replacement, Dock Contact Assembly: 步骤 5 中的图像 1，1
    在这个步骤中使用的工具：
    Tweezers
    $4.99
    购买

    • Use tweezers to pull the dock contact display cable away from the connector on the motherboard.

    编辑

  7. One Education Infinity:One Dock Contact Assembly Replacement: 步骤 6 中的图像 1，1

    • Use a Phillips #000 screwdriver to unscrew the two 4.2mm screws from the circuit board containing the dock contact.

    编辑

  8. One Education Infinity:One Dock Contact Assembly Replacement: 步骤 7 中的图像 1，1

    • Lift the dock contact assembly away from the device.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与3其他贡献者

Taylor Bratsch

于09/06/16注册

6,089 声望

创作了14篇指南

徽章: 32

+ 29更多徽章

0指南评论

添加评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 2

过去 30 天： 2

总计 239