修复你的物品 社区 商店

One Education Infinity:One Daughterboard Replacement

简介

Follow this guide to replace the daughterboard in the One Education Infinity:One laptop.

你所需要的

  1. One Education Infinity:One Daughterboard Replacement, Back Case: 步骤 1 中的图像 1，2 One Education Infinity:One Daughterboard Replacement, Back Case: 步骤 1 中的图像 2，2

    • Use a spudger to pry the four rubber pads away from the bottom of the case.

    • Use a Phillips #00 screwdriver to unscrew the four 6.4 mm screws.

    编辑

  2. One Education Infinity:One Daughterboard Replacement: 步骤 2 中的图像 1，2 One Education Infinity:One Daughterboard Replacement: 步骤 2 中的图像 2，2

    • Insert a Jimmy or other prying tool into the seam on the edge of the casing.

    • Trace along the edges of the device until all clips are released.

    • Lift the back case away from the device.

    编辑

  3. One Education Infinity:One Daughterboard Replacement: 步骤 3 中的图像 1，1

    • Use a Phillips #00 screwdriver to unscrew the four 6.4mm screws on the hinge mounts.

    编辑

  5. One Education Infinity:One Daughterboard Replacement: 步骤 4 中的图像 1，2 One Education Infinity:One Daughterboard Replacement: 步骤 4 中的图像 2，2

    • Use tweezers to lift the fabric cover and hinge connector away from the daughterboard.

    • Always use ESD safe tools when working with delicate electrical components.

    编辑

  6. One Education Infinity:One Daughterboard Replacement, Daughterboard: 步骤 5 中的图像 1，2 One Education Infinity:One Daughterboard Replacement, Daughterboard: 步骤 5 中的图像 2，2

    • Flip up the black retaining flap on the ZIF connector holding the large grey ribbon cable in place.

    • Pull the ribbon cable straight out of the ZIF connector.

    编辑

  7. One Education Infinity:One Daughterboard Replacement: 步骤 6 中的图像 1，2 One Education Infinity:One Daughterboard Replacement: 步骤 6 中的图像 2，2

    • Use the flat end of a spudger to flip up the black tab on the smaller ZIF connector.

    • Use tweezers to pull the ribbon cable straight out of the connector.

    编辑

  8. One Education Infinity:One Daughterboard Replacement: 步骤 7 中的图像 1，3 One Education Infinity:One Daughterboard Replacement: 步骤 7 中的图像 2，3 One Education Infinity:One Daughterboard Replacement: 步骤 7 中的图像 3，3

    • Use a Phillips #000 screwdriver to unscrew the three 3.4mm screws.

    • Lift the daughterboard away from the device to remove.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与1其他贡献者

Taylor Bratsch

于09/06/16注册

5,742 声望

创作了14篇指南

徽章: 32

+ 29更多徽章

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 1

过去 30 天： 2

总计 245