跳转到主内容

简介

This guide will show you how to replace a speaker that no longer works. This is a common problem with any electronic device and is an easy fix. Just remember to turn the power off before you begin, and to be careful when using soldering tools.

  1. Onda V701 Speaker Replacement, Back Panel: 步骤 1 中的图像 1,3 Onda V701 Speaker Replacement, Back Panel: 步骤 1 中的图像 2,3 Onda V701 Speaker Replacement, Back Panel: 步骤 1 中的图像 3,3
    • Ensure device is powered off before disassembly.

    • Remove the 4 rubber screw plugs using a spudger.

  2. Onda V701 Speaker Replacement: 步骤 2 中的图像 1,3 Onda V701 Speaker Replacement: 步骤 2 中的图像 2,3 Onda V701 Speaker Replacement: 步骤 2 中的图像 3,3
    • Remove the four 4.8mm mounting screws using a PH00 screwdriver.

  3. Onda V701 Speaker Replacement: 步骤 3 中的图像 1,2 Onda V701 Speaker Replacement: 步骤 3 中的图像 2,2
    • Starting at one corner, gently pry the back panel assembly from the screen assembly using two plastic opening tools.

    • Slide the opening tools around the perimeter of the device to separate the back panel assembly from the screen assembly.

  4. Onda V701 Speaker Replacement: 步骤 4 中的图像 1,2 Onda V701 Speaker Replacement: 步骤 4 中的图像 2,2
    • Gently lift the screen assembly away from the back cover assembly.

    • Be careful when separating the two pieces as the screen assembly is still connected to the mother board by two ribbon cables.

  5. Onda V701 Speaker Replacement: 步骤 5 中的图像 1,3 Onda V701 Speaker Replacement: 步骤 5 中的图像 2,3 Onda V701 Speaker Replacement: 步骤 5 中的图像 3,3
    • Disconnect the two ribbon connectors by flipping the gray tabs up with a fingernail or a spudger.

    • Remove the ribbon cables.

  6. Onda V701 Speaker Replacement, Speaker: 步骤 6 中的图像 1,2 Onda V701 Speaker Replacement, Speaker: 步骤 6 中的图像 2,2
    • Desolder the black(-) and red(+) wires connecting the speaker to the motherboard using a soldering iron and tweezers to hold the wire.

    • Soldering requires a lot of heat. Do not touch the metal part of the soldering iron. Wear gloves if necessary to protect your hands. The fumes from soldering could also be toxic. Work in a well ventilated area and/or use a respirator.

  7. Onda V701 Speaker Replacement: 步骤 7 中的图像 1,3 Onda V701 Speaker Replacement: 步骤 7 中的图像 2,3 Onda V701 Speaker Replacement: 步骤 7 中的图像 3,3
    • Carefully pry the speaker assembly off of the back panel using a spudger.

    • The speaker is held on with a small amount of adhesive.

结论

To reassemble your device, follow these instructions in reverse order.

Bradley Huber

于2015年03月11日注册

366 声望

创作了3篇指南

团队

Colorado Springs, Team 4-6, Panko Spring 2015 Colorado Springs, Team 4-6, Panko Spring 2015 的会员

UCCS-PANKO-S15S4G6

3 名成员

创作了10篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 1

总计 183