跳转到主内容

Onda V701 Front- Facing Camera Replacement

你所需要的

  1. Onda V701 Front- Facing Camera Replacement, Back Panel: 步骤 1 中的图像 1,3 Onda V701 Front- Facing Camera Replacement, Back Panel: 步骤 1 中的图像 2,3 Onda V701 Front- Facing Camera Replacement, Back Panel: 步骤 1 中的图像 3,3
    • Ensure device is powered off before disassembly.

    • Remove the 4 rubber screw plugs using a spudger.

  2. Onda V701 Front- Facing Camera Replacement: 步骤 2 中的图像 1,3 Onda V701 Front- Facing Camera Replacement: 步骤 2 中的图像 2,3 Onda V701 Front- Facing Camera Replacement: 步骤 2 中的图像 3,3
    • Remove the four 4.8mm mounting screws using a PH00 screwdriver.

  3. Onda V701 Front- Facing Camera Replacement: 步骤 3 中的图像 1,2 Onda V701 Front- Facing Camera Replacement: 步骤 3 中的图像 2,2
    • Starting at one corner, gently pry the back panel assembly from the screen assembly using two plastic opening tools.

    • Slide the opening tools around the perimeter of the device to separate the back panel assembly from the screen assembly.

  4. Onda V701 Front- Facing Camera Replacement: 步骤 4 中的图像 1,2 Onda V701 Front- Facing Camera Replacement: 步骤 4 中的图像 2,2
    • Gently lift the screen assembly away from the back cover assembly.

    • Be careful when separating the two pieces as the screen assembly is still connected to the mother board by two ribbon cables.

  5. Onda V701 Front- Facing Camera Replacement: 步骤 5 中的图像 1,3 Onda V701 Front- Facing Camera Replacement: 步骤 5 中的图像 2,3 Onda V701 Front- Facing Camera Replacement: 步骤 5 中的图像 3,3
    • Disconnect the two ribbon connectors by flipping the gray tabs up with a fingernail or a spudger.

    • Remove the ribbon cables.

  6. Onda V701 Front- Facing Camera Replacement, Front- Facing Camera: 步骤 6 中的图像 1,2 Onda V701 Front- Facing Camera Replacement, Front- Facing Camera: 步骤 6 中的图像 2,2
    • Gently pry the front-facing camera away from the back panel using a spudger.

  7. Onda V701 Front- Facing Camera Replacement: 步骤 7 中的图像 1,2 Onda V701 Front- Facing Camera Replacement: 步骤 7 中的图像 2,2
    • Flip the gray locking tab of the ribbon connector up using a spudger.

    • Remove the ribbon cable from the connector.

  8. Onda V701 Front- Facing Camera Replacement: 步骤 8 中的图像 1,1
    • Remove the front-facing camera assembly.

结论

To reassemble your device, follow these instructions in reverse order.

Bradley Huber

于03/11/15注册

366 声望

创作了3篇指南

团队

Colorado Springs, Team 4-6, Panko Spring 2015 Colorado Springs, Team 4-6, Panko Spring 2015 的会员

UCCS-PANKO-S15S4G6

3 名成员

创作了10篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 1

过去 30 天: 1

总计 247