Onda V701 Front- Facing Camera Replacement - iFixit 维修指南

加入维修社区 - 创建账户

简介

This guide will show you how to replace the front facing-camera assembly of the Onda V701. The front facing-camera is the only camera on the device and replacing it is a very easy process.

你所需要的

1. 步骤 1 Back Panel
  Ensure device is powered off before disassembly.
  
  Remove the 4 rubber screw plugs using a spudger.
  翻译
  
  询问修复机器人
  
  添加评论
  
  1024
2. 步骤 2
  Remove the four 4.8mm mounting screws using a PH00 screwdriver.
  翻译
  
  询问修复机器人
  
  添加评论
  
  1024
3. 步骤 3
  Starting at one corner, gently pry the back panel assembly from the screen assembly using two plastic opening tools.
  
  Slide the opening tools around the perimeter of the device to separate the back panel assembly from the screen assembly.
  翻译
  
  询问修复机器人
  
  添加评论
  
  1024
5. 步骤 4
  Gently lift the screen assembly away from the back cover assembly.
  
  Be careful when separating the two pieces as the screen assembly is still connected to the mother board by two ribbon cables.
  翻译
  
  询问修复机器人
  
  添加评论
  
  1024
6. 步骤 5
  Disconnect the two ribbon connectors by flipping the gray tabs up with a fingernail or a spudger.
  
  Remove the ribbon cables.
  翻译
  
  询问修复机器人
  
  添加评论
  
  1024
1. 步骤 6 Front- Facing Camera
  Gently pry the front-facing camera away from the back panel using a spudger.
  翻译
  
  询问修复机器人
  
  添加评论
  
  1024
2. 步骤 7
  Flip the gray locking tab of the ribbon connector up using a spudger.
  
  Remove the ribbon cable from the connector.
  翻译
  
  询问修复机器人
  
  添加评论
  
  1024
3. 步骤 8
  Remove the front-facing camera assembly.
  翻译
  
  询问修复机器人
  
  添加评论
  
  1024

结论

To reassemble your device, follow these instructions in reverse order.

取消：我没有完成这个指南。

作者

与4其他贡献者

Bradley Huber

于03/11/15注册

366 声望

创作了3篇指南

+ 11更多徽章

团队

Colorado Springs, Team 4-6, Panko Spring 2015 Colorado Springs, Team 4-6, Panko Spring 2015 的会员

UCCS-PANKO-S15S4G6

3 名成员

创作了10篇指南

0指南评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 4

过去 30 天： 23

总计 510