跳转到主内容

你所需要的

  1. Omaker M4 Battery Replacement, Back Case: 步骤 1 中的图像 1,1
    • Flip the device over so the front of the speaker is facing down. Make sure to place the speaker on a flat surface

  2. Omaker M4 Battery Replacement: 步骤 2 中的图像 1,2 Omaker M4 Battery Replacement: 步骤 2 中的图像 2,2
    • Use a T6 Torx screwdriver to remove the four 9mm screws from the back of the device.

  3. Omaker M4 Battery Replacement: 步骤 3 中的图像 1,2 Omaker M4 Battery Replacement: 步骤 3 中的图像 2,2
    • Use a magnet to remove the screws after unscrewing them and place them aside.

  4. Omaker M4 Battery Replacement: 步骤 4 中的图像 1,1
    • Carefully remove the back cover without breaking the battery wire.

  5. Omaker M4 Battery Replacement: 步骤 5 中的图像 1,2 Omaker M4 Battery Replacement: 步骤 5 中的图像 2,2
    • Remove the end of the battery connection from the motherboard by holding the end of the wire and carefully pulling it out of the socket using tweezers.

    • The battery is still attached to the back cover.

  6. Omaker M4 Battery Replacement, Battery: 步骤 6 中的图像 1,3 Omaker M4 Battery Replacement, Battery: 步骤 6 中的图像 2,3 Omaker M4 Battery Replacement, Battery: 步骤 6 中的图像 3,3
    • Use the metal spudger to carefully pry along the entire side of the battery from its connecting tape on the back cover.

结论

To reassemble your device, follow these instructions in reverse order.

3等其他人完成本指南。

Carlos Pernia

于2016年02月10日注册

170 声望

撰写一个指南

团队

USF Tampa, Team 2-2, Sullivan Spring 2016 USF Tampa, Team 2-2, Sullivan Spring 2016 的会员

USFT-SULLIVAN-S16S2G2

3 名成员

创作了2篇指南

一条评论

What battery is required for this though? Is it easily found on amazon?

Mohsin - 回复

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 6

过去 30 天: 10

总计 1,197