跳转到主内容

修复你的物品

维修的权力

配件 & 工具

  1. Using the iFixit Opening Tool, pry off the plastic part of the lens. Using the T6 Torx screwdriver, unscrew the three screws. Using the T6 Torx screwdriver, unscrew the three screws.
    • Using the iFixit Opening Tool, pry off the plastic part of the lens.

    • Using the T6 Torx screwdriver, unscrew the three screws.

  2. Using the Phillips #00 screwdriver, unscrew the three screws. Carefully swivel the metal cover  out towards you. Using tweezers, remove the metal washer.
    • Using the Phillips #00 screwdriver, unscrew the three screws.

    • Carefully swivel the metal cover out towards you.

    • Using tweezers, remove the metal washer.

  3. Using the tweezers, slowly peel off the plate. Using the tweezers, slowly peel off the plate.
    • Using the tweezers, slowly peel off the plate.

  4. Using the Phillips #00 screwdriver, unscrew the two screws on the side of the camera. Using the Phillips #00 screwdriver, unscrew the two screws on the side of the camera. Using the Phillips #00 screwdriver, unscrew the two screws on the side of the camera.
    • Using the Phillips #00 screwdriver, unscrew the two screws on the side of the camera.

  5. On the opposite side, use the Phillips #00 screwdriver to unscrew both screws. Take out the speaker plate. Open the multi-connector cover and slide off the side panel.
    • On the opposite side, use the Phillips #00 screwdriver to unscrew both screws.

    • Take out the speaker plate.

    • Open the multi-connector cover and slide off the side panel.

  6. LCD iPhone 屏幕维修套装

    预算选项,涵盖在我们的终身保修中。

    购买套装

    LCD iPhone 屏幕维修套装

    削减维修成本,而不是质量。

    购买套装
  7. Using the Phillips #00 screwdriver, unscrew the screw above the speaker. On the bottom side of the camera, unscrew the two screws. On the bottom side of the camera, unscrew the two screws.
    • Using the Phillips #00 screwdriver, unscrew the screw above the speaker.

    • On the bottom side of the camera, unscrew the two screws.

  8. Open the battery compartment cover. Use the Phillips #00 screwdriver to unscrew the screw in the battery compartment. Use the Phillips #00 screwdriver to unscrew the screw in the battery compartment.
    • Open the battery compartment cover.

    • Use the Phillips #00 screwdriver to unscrew the screw in the battery compartment.

  9. On the front of the camera, unscrew the two screws shown. Gently pull on the side until the camera is separated from the back panel. Remove the shutter and power button.
    • On the front of the camera, unscrew the two screws shown.

    • Gently pull on the side until the camera is separated from the back panel.

    • Remove the shutter and power button.

  10. Use the Phillips #00 screwdriver to unscrew the four screws on the front of the camera. Unscrew the shutter using the Phillips #00 screwdriver. Unscrew the shutter using the Phillips #00 screwdriver.
    • Use the Phillips #00 screwdriver to unscrew the four screws on the front of the camera.

    • Unscrew the shutter using the Phillips #00 screwdriver.

  11. Release the top holding using a spudger. Slowly and carefully separate the front and back of the camera, exposing the electrical ribbons.
    • Release the top holding using a spudger.

    • Slowly and carefully separate the front and back of the camera, exposing the electrical ribbons.

  12. Using the spudger and tweezers if needed, remove the ribbons from the computer chips. Using the spudger and tweezers if needed, remove the ribbons from the computer chips. Using the spudger and tweezers if needed, remove the ribbons from the computer chips.
    • Using the spudger and tweezers if needed, remove the ribbons from the computer chips.

  13. Unscrew the two screws found on the left side of the screen using the PH#00 head. Peel off the gel tape using tweezers. Unscrew the five 0.6 mm screws using the PH#00 head.
    • Unscrew the two screws found on the left side of the screen using the PH#00 head.

    • Peel off the gel tape using tweezers.

    • Unscrew the five 0.6 mm screws using the PH#00 head.

  14. Use the spudger to carefully pry off the LCD screen. Use the spudger to carefully pry off the LCD screen.
    • Use the spudger to carefully pry off the LCD screen.

  15. Use the tweezers to take out the rubber button holder and its buttons. Use the tweezers to take out the rubber button holder and its buttons. Use the tweezers to take out the rubber button holder and its buttons.
    • Use the tweezers to take out the rubber button holder and its buttons.

结论

To reassemble your device, follow these instructions in reverse order.

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 5

总计 998