修复你的物品 社区 商店

Olympus D590 Motherboard Replacement

简介

Step-by-step Instruction Guide

Olympus D590 Logic Board Replacement

你所需要的

  1. Olympus D590 Motherboard Replacement, Face Plate: 步骤 1 中的图像 1，1

    • Remove five baseplate screws using a Phillips #00 screwdriver.

    编辑

  2. Olympus D590 Motherboard Replacement: 步骤 2 中的图像 1，1

    • Press and slide the battery cover retainer clip to the left. Use tweezers to lift the battery cover away.

    编辑

  3. Olympus D590 Motherboard Replacement: 步骤 3 中的图像 1，1

    • Remove the single screw from the battery housing using a Phillips #00 screwdriver.

    编辑

  4. Olympus D590 Motherboard Replacement: 步骤 4 中的图像 1，1

    • Using tweezers, lift the rubber plate to expose the ports.

    编辑

  6. Olympus D590 Motherboard Replacement: 步骤 5 中的图像 1，1

    • Remove two screws from the ports using a Phillips #00 screwdriver.

    编辑

  7. Olympus D590 Motherboard Replacement: 步骤 6 中的图像 1，1

    • Use a spudger to pry the faceplate away from the rest of the camera.

    编辑

  8. Olympus D590 Motherboard Replacement: 步骤 7 中的图像 1，1

    • To avoid disconnection of the connector line to the motherboard, use caution when pulling faceplate away from camera case.

    • Damage to the connector line will prevent the on/off power switch's operational function.

    编辑

  9. Olympus D590 Motherboard Replacement, Motherboard: 步骤 8 中的图像 1，1

    • Remove four screws holding the motherboard to the internal housing component using a Phillips #1 screwdriver.

    编辑

  10. Olympus D590 Motherboard Replacement: 步骤 9 中的图像 1，1

    • Be cautious of the wires attached to the motherboard.

    • Remove the motherboard from the internal housing component.

    • Do not completely lift the motherboard out with the wiring connected. The wires must be disconnected before proceeding. The next step will demonstrate disconnection process.

    编辑

  11. Olympus D590 Motherboard Replacement: 步骤 10 中的图像 1，3 Olympus D590 Motherboard Replacement: 步骤 10 中的图像 2，3 Olympus D590 Motherboard Replacement: 步骤 10 中的图像 3，3

    • Use rounded tweezers to disconnect the three wiring strips from the motherboard.

    • Using sharp tweezers may tear wiring tape and wires.

    • Use gentle force when wiggling or pulling wiring tape and wires to disconnect from the motherboard.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

作者

与7其他贡献者

Sara

于04/15/10注册

84 声望

创作了2篇指南

徽章: 6

+ 3更多徽章

团队

Cal Poly, Team 28-23, Regan Spring 2010 Cal Poly, Team 28-23, Regan Spring 2010 的会员

CPSU-REGAN-S10S28G23

4 名成员

创作了14篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 2

总计 1,767