简介

Step by step instructions to clean or replace the control buttons on the camera.

Before disassembling your camera, be sure it is powered off. Remove two screws from the video port located at the side panel of the camera.
  • Before disassembling your camera, be sure it is powered off.

  • Remove two screws from the video port located at the side panel of the camera.

  • Remove three screws from the bottom panel of the camera.

添加评论

Open the USB port cover, and remove three screws from inside. Next, open the memory slot cover and remove the screw.
  • Open the USB port cover, and remove three screws from inside.

  • Next, open the memory slot cover and remove the screw.

添加评论

Mac RAM 套件
加速你的Mac。充分利用它的内存。
Mac RAM 套件
从Mac中清理出更多内存。
Use the blue opening tool to loosen and separate the back cover from the camera. Use the blue opening tool to loosen and separate the back cover from the camera. Use the blue opening tool to loosen and separate the back cover from the camera.
  • Use the blue opening tool to loosen and separate the back cover from the camera.

添加评论

Locate and unscrew the three screws inside the back cover body (picture 3) . Remove button pad assembly from the back cover. Remove button pad assembly from the back cover.
  • Locate and unscrew the three screws inside the back cover body (picture 3) .

  • Remove button pad assembly from the back cover.

添加评论

The button assembly is now separate from the back cover. Inspect for broken areas. Replace or clean the button parts. Inspect for broken areas. Replace or clean the button parts.
  • The button assembly is now separate from the back cover.

  • Inspect for broken areas. Replace or clean the button parts.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

GradStudents2011

于2011年09月08日注册

21 信誉积分

创作了3篇指南

团队

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 710