简介

We will show how to tear down to and remove the LCD screen.

  1. Unscrew all immediately visible screws on the body of the camera. Locations (# of screws): Bottom of camera (3), left side near video port (2), under cover of USB slot (3), memory card slot (1).
    • Unscrew all immediately visible screws on the body of the camera.

    • Locations (# of screws): Bottom of camera (3), left side near video port (2), under cover of USB slot (3), memory card slot (1).

  2. Use the plastic opening tool to separate the back cover from the camera. Use the plastic opening tool to separate the back cover from the camera. Use the plastic opening tool to separate the back cover from the camera.
    • Use the plastic opening tool to separate the back cover from the camera.

  3. With the back plate off, locate two screws: one diagonal from the top left of the LCD screen and one diagonal from the top right of the LCD screen. Unscrew both of these screws. Unscrew both of these screws.
    • With the back plate off, locate two screws: one diagonal from the top left of the LCD screen and one diagonal from the top right of the LCD screen.

    • Unscrew both of these screws.

  4. 所有超过US$100.00或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店

    善于维修,即天赋异禀。

    与 #ImAGenius 分享您的维修故事

    我们都是天才

    与 #ImAGenius 分享您的维修故事

  5. Flip the LCD screen over.
    • Flip the LCD screen over.

  6. Undo the clip holding the ribbon cable that attaches the LCD screen to the motherboard.
    • Undo the clip holding the ribbon cable that attaches the LCD screen to the motherboard.

  7. Unclip the plug attached to the red and white wires that connects the LCD screen to the motherboard. Unclip the plug attached to the red and white wires that connects the LCD screen to the motherboard.
    • Unclip the plug attached to the red and white wires that connects the LCD screen to the motherboard.

  8. The LCD screen housing should now be free of the camera. The LCD screen housing should now be free of the camera. The LCD screen housing should now be free of the camera.
    • The LCD screen housing should now be free of the camera.

结论

To reassemble your device, follow these instructions in reverse order.

GradStudents2011

于2011年09月08日注册

21 信誉积分

创作了3篇指南

团队

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 1

总计 959