加入维修社区 - 创建账户

简介

The purpose of this guide is to provide information on replacing the buttons on your Oculus Rift CV1 remote. You can learn more about the Oculus Rift CV1 on the device page. You will need a Phillips #000 screwdriver for this replacement. Ensure buttons are cleaned with an electronics safe cleaner before reassembly to prevent the buttons from sticking.

你所需要的

步骤 1 Battery

Oculus Rift CV1 Remote Button Replacement, Battery: 步骤 1 中的图像 1，3

Oculus Rift CV1 Remote Button Replacement, Battery: 步骤 1 中的图像 2，3

Oculus Rift CV1 Remote Button Replacement, Battery: 步骤 1 中的图像 3，3

Remove the back panel by firmly sliding it towards the strap.

编辑

询问修复机器人

步骤 2

Oculus Rift CV1 Remote Button Replacement: 步骤 2 中的图像 3，3

Push down on the tab under the battery.
Firmly slide the battery away from you. The battery should unlatch from its previous position.
Once the battery is removed, release the tab.

编辑

询问修复机器人

步骤 3 Remote Button

Oculus Rift CV1 Remote Button Replacement, Remote Button: 步骤 3 中的图像 1，1

Remove the four 4mm Phillips #000 screws from the back of the remote.

编辑

询问修复机器人

步骤 4

Gently lift the wrist strap to split the back panel into two.

编辑

询问修复机器人

步骤 5

Gently peel off the top of the control board.
Be gentle, if the buttons fall off, try to keep them in the orientation that they were in.
If the large black button falls off, place it back into the shell by orienting the tabs on the button to match the holes on the shell.