跳转到主内容

本指南有最近更改,您可查看未经巡查的最新版本

OLPC XO-4 Touch Lower Case Replacement

你所需要的

  1. OLPC XO-4 Touch Lower Case Replacement, Battery: 步骤 1 中的图像 1,1
    • Turn the laptop upside-down, with the handle facing away from you.

  2. OLPC XO-4 Touch Lower Case Replacement: 步骤 2 中的图像 1,2 OLPC XO-4 Touch Lower Case Replacement: 步骤 2 中的图像 2,2
    • Pull the lock tabs towards the green outer edges of the laptop.

    • Hold the left lock tab in the unlock position until the battery is completely removed in the next step.

  3. OLPC XO-4 Touch Lower Case Replacement: 步骤 3 中的图像 1,2 OLPC XO-4 Touch Lower Case Replacement: 步骤 3 中的图像 2,2
    • Lift up on the middle of the battery to remove it from the device.

  4. OLPC XO-4 Touch Lower Case Replacement, Keyboard: 步骤 4 中的图像 1,2 OLPC XO-4 Touch Lower Case Replacement, Keyboard: 步骤 4 中的图像 2,2
    • Remove the two 2mm Phillips #1 screws from beneath the battery lock tabs.

  5. OLPC XO-4 Touch Lower Case Replacement: 步骤 5 中的图像 1,3 OLPC XO-4 Touch Lower Case Replacement: 步骤 5 中的图像 2,3 OLPC XO-4 Touch Lower Case Replacement: 步骤 5 中的图像 3,3
    • Flip the laptop over to its normal position.

    • Lift the two antennas on both sides to unlock the screen.

    • Open the laptop.

  6. OLPC XO-4 Touch Lower Case Replacement: 步骤 6 中的图像 1,2 OLPC XO-4 Touch Lower Case Replacement: 步骤 6 中的图像 2,2
    • Be careful not to pull the keyboard too far because there is still a ribbon cable attached to the bottom.

    • Gently lift up on the back of the keyboard.

    • Pull the keyboard up far enough to expose the ribbon cable.

  7. OLPC XO-4 Touch Lower Case Replacement: 步骤 7 中的图像 1,2 OLPC XO-4 Touch Lower Case Replacement: 步骤 7 中的图像 2,2
    • Gently lift up on the black connector to release the ribbon cable.

    • Gently pull the blue plastic tab up and away from the black connector.

    • Remove the keyboard from the laptop.

  8. OLPC XO-4 Touch Lower Case Replacement, Lower Case: 步骤 8 中的图像 1,2 OLPC XO-4 Touch Lower Case Replacement, Lower Case: 步骤 8 中的图像 2,2
    • Close and flip the laptop over so you are looking at the battery compartment

    • Remove the five 4mm Phillips #1 screws from inside the battery compartment

  9. OLPC XO-4 Touch Lower Case Replacement: 步骤 9 中的图像 1,3 OLPC XO-4 Touch Lower Case Replacement: 步骤 9 中的图像 2,3 OLPC XO-4 Touch Lower Case Replacement: 步骤 9 中的图像 3,3
    • Flip the laptop over, showing the top of the device.

    • Open the laptop and rotate the screen ninety degrees.

    • Tilt the screen so the lower right corner of the screen is closer to the lower case.

  10. OLPC XO-4 Touch Lower Case Replacement: 步骤 10 中的图像 1,3 OLPC XO-4 Touch Lower Case Replacement: 步骤 10 中的图像 2,3 OLPC XO-4 Touch Lower Case Replacement: 步骤 10 中的图像 3,3
    • Push in and lift up on the keyboard edge of the white handle piece.

    • Pull the piece towards yourself to remove it from the laptop.

  11. OLPC XO-4 Touch Lower Case Replacement: 步骤 11 中的图像 1,1
    • Remove the four 4mm Phillips #1 screws attaching the green trim to the body of the computer.

  12. OLPC XO-4 Touch Lower Case Replacement: 步骤 12 中的图像 1,2 OLPC XO-4 Touch Lower Case Replacement: 步骤 12 中的图像 2,2
    • Pry off the rear green trim piece.

  13. OLPC XO-4 Touch Lower Case Replacement: 步骤 13 中的图像 1,3 OLPC XO-4 Touch Lower Case Replacement: 步骤 13 中的图像 2,3 OLPC XO-4 Touch Lower Case Replacement: 步骤 13 中的图像 3,3
    • Be careful not to pull the bottom portion of the laptop completely off, as there is a cable connecting it to the laptop.

    • Slide the green trim pieces away from the screen.

    • This should release the entire bottom portion of the laptop.

  14. OLPC XO-4 Touch Lower Case Replacement: 步骤 14 中的图像 1,3 OLPC XO-4 Touch Lower Case Replacement: 步骤 14 中的图像 2,3 OLPC XO-4 Touch Lower Case Replacement: 步骤 14 中的图像 3,3
    • Unplug the cable from the mouse buttons controller to completely remove the lower frame from the device.

  15. OLPC XO-4 Touch Lower Case Replacement: 步骤 15 中的图像 1,2 OLPC XO-4 Touch Lower Case Replacement: 步骤 15 中的图像 2,2
    • Rotate the entire lower assembly up slightly, and pull it away from the screen to free it from the screen hinge.

    • There may be some adhesive holding the cable to the metal plate. Gently pull the cable off of the plate if it is stuck.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

团队

Cal Poly, Team 3-30, Amido Winter 2013 Cal Poly, Team 3-30, Amido Winter 2013 的会员

CPSU-AMIDO-W13S3G30

3 名成员

创作了12篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 3

总计 335