跳转到主内容

简介

This guide will walk you through the process of opening the Back Panel to your Nvidia Shield Tablet K1.

配件

没有特定配件。

  1. Starting at the Micro SD Card Slot and using the blue plastic opening tool, begin to maneuver the tool around the edges while applying light pressure to lift the panel upwards.
    • Starting at the Micro SD Card Slot and using the blue plastic opening tool, begin to maneuver the tool around the edges while applying light pressure to lift the panel upwards.

  2. There are clips holding the back panel to the rest of the case. You must apply some force to lift the back panel off. Continue lifting up the panel all the way around the edges of the tablet.
    • There are clips holding the back panel to the rest of the case. You must apply some force to lift the back panel off.

    • Continue lifting up the panel all the way around the edges of the tablet.

    • Once all of the panel clips are unfastened, gently remove the back panel.

结论

To reassemble your device, follow these instructions in reverse order.

7等其他人完成本指南。

Ryan Butler

于2016年02月09日注册

1,536 信誉积分

创作了9篇指南

团队

iFixit, Team 1-1, Weber Winter 2016 iFixit, Team 1-1, Weber Winter 2016 的会员

FIX-WEBER-W16S1G1

4 名成员

创作了26篇指南

2条评论

Hello, I’m planning on replacing the battery on my K1 soon, will the rear panel snap back in?

Scott - 回复

but wait theres flex cable your not showing thats attached to the cover it could be ripped off and bricked like mine because no one know the name of said cable

Christian Rogers - 回复

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 4

过去的30天: 33

总计 4,405