跳转到主内容

简介

You will need to replace the battery in your controller if it is not holding a charge or your controller is not turning on. When taking apart the controller, be careful as the buttons are not held in place by anything and can easily fall out.

  1. Nvidia Shield TV 1st Generation Controller Battery Replacement, Controller Battery: 步骤 1 中的图像 1,2 Nvidia Shield TV 1st Generation Controller Battery Replacement, Controller Battery: 步骤 1 中的图像 2,2
    • Remove the indicated six screws using the T6 Torx screwdriver.

  2. Nvidia Shield TV 1st Generation Controller Battery Replacement: 步骤 2 中的图像 1,2 Nvidia Shield TV 1st Generation Controller Battery Replacement: 步骤 2 中的图像 2,2
    • Use the plastic opening tool to pry the face of the controller away from the body.

    • Make sure the controller is face down during this step as the buttons can easily fall out.

  3. Nvidia Shield TV 1st Generation Controller Battery Replacement: 步骤 3 中的图像 1,1
    • Carefully remove the indicated ribbon wires from the face of the controller.

  4. Nvidia Shield TV 1st Generation Controller Battery Replacement: 步骤 4 中的图像 1,2 Nvidia Shield TV 1st Generation Controller Battery Replacement: 步骤 4 中的图像 2,2
    • Use the angled tweezers to remove the vibration motor cable, moving it upward from its socket.

    • Lift the vibration motor out of the front case.

    • Repeat for the other side.

    • Use the angled tweezers to remove the battery cable, moving it upward from its socket.

  5. Nvidia Shield TV 1st Generation Controller Battery Replacement: 步骤 5 中的图像 1,3 Nvidia Shield TV 1st Generation Controller Battery Replacement: 步骤 5 中的图像 2,3 Nvidia Shield TV 1st Generation Controller Battery Replacement: 步骤 5 中的图像 3,3
    • Using the T6 Torx screwdriver, remove the indicated eight screws from the logic board.

    • Lift the logic board away from the front case.

  6. Nvidia Shield TV 1st Generation Controller Battery Replacement: 步骤 6 中的图像 1,3 Nvidia Shield TV 1st Generation Controller Battery Replacement: 步骤 6 中的图像 2,3 Nvidia Shield TV 1st Generation Controller Battery Replacement: 步骤 6 中的图像 3,3
    • Using the T6 Torx screwdriver, remove the indicated four screws from the panel.

    • Remove the panel from the front case.

    • Lift the battery from the front case to remove it.

结论

To reassemble your device, follow these instructions in reverse order.

12等其他人完成本指南。

Joshua Neally

于2017年09月25日注册

575 声望

创作了4篇指南

团队

USF Tampa, Team S16-G6, Eyestone Fall 2017 USF Tampa, Team S16-G6, Eyestone Fall 2017 的会员

USFT-EYESTONE-F17S16G6

3 名成员

创作了6篇指南

8条评论

Where can i buy the replacement Battery? What tags should i use to find it?

Rancid 3000a - 回复

LC18650 Remote Control accu

djcornelissen - 回复

Are battery packs available for the 2017 controller?

Andrew - 回复

Simply reconnecting the battery fixed my issues

Charles Keisler - 回复

添加评论

浏览统计数据:

过去 24 小时: 9

过去 7 天: 58

过去 30 天: 271

总计 16,092