跳转到主内容

Nvidia Shield Pro Android TV Controller Triggers Replacement

你所需要的

  1. Nvidia Shield Pro Android TV Controller Triggers Replacement, Bluetooth Controller Thumbsticks: 步骤 1 中的图像 1,3 Nvidia Shield Pro Android TV Controller Triggers Replacement, Bluetooth Controller Thumbsticks: 步骤 1 中的图像 2,3 Nvidia Shield Pro Android TV Controller Triggers Replacement, Bluetooth Controller Thumbsticks: 步骤 1 中的图像 3,3
    • Remove the six T6 Torx screws from the back of the controller.

  2. Nvidia Shield Pro Android TV Controller Triggers Replacement: 步骤 2 中的图像 1,1
    • Gently pry open the top frame of the cover with a plastic opening tool.

  3. Nvidia Shield Pro Android TV Controller Triggers Replacement: 步骤 3 中的图像 1,2 Nvidia Shield Pro Android TV Controller Triggers Replacement: 步骤 3 中的图像 2,2
    • Gently pull the wire connector directly out of its socket, separating the two halves of the controller.

  4. Nvidia Shield Pro Android TV Controller Triggers Replacement: 步骤 4 中的图像 1,2 Nvidia Shield Pro Android TV Controller Triggers Replacement: 步骤 4 中的图像 2,2
    • Remove the two T6 Torx screws.

  5. Nvidia Shield Pro Android TV Controller Triggers Replacement: 步骤 5 中的图像 1,2 Nvidia Shield Pro Android TV Controller Triggers Replacement: 步骤 5 中的图像 2,2
    • Remove the guard piece that secures the thumb-sticks to the controller.

    • Apply vertical pressure with two fingers to carefully pop off the thumb-stick(s) in need of repair.

    • Replace it by sliding a new thumb-stick onto the plastic post that secured the old one.

  6. Nvidia Shield Pro Android TV Controller Triggers Replacement, Triggers: 步骤 6 中的图像 1,3 Nvidia Shield Pro Android TV Controller Triggers Replacement, Triggers: 步骤 6 中的图像 2,3 Nvidia Shield Pro Android TV Controller Triggers Replacement, Triggers: 步骤 6 中的图像 3,3
    • Use a Torx T6 screwdriver to remove the two 7 mm screws from the triggers (one on each trigger).

    • Use a Torx T5 screwdriver to remove the two 5 mm screws securing the motherboard.

    • Gently lift the motherboard from the controller housing.

  7. Nvidia Shield Pro Android TV Controller Triggers Replacement: 步骤 7 中的图像 1,3 Nvidia Shield Pro Android TV Controller Triggers Replacement: 步骤 7 中的图像 2,3 Nvidia Shield Pro Android TV Controller Triggers Replacement: 步骤 7 中的图像 3,3
    • Use a Torx T5 screwdriver to remove the two 5 mm screws from the motherboard.

    • Carefully pull the trigger directly out of its socket.

结论

To reassemble your device, follow these instructions in reverse order.

一条评论

how do you put the shoulder buttons back in. They fell out when I was trying to replace the battery

demarko9999 - 回复

添加评论

浏览统计数据:

过去 24 小时: 2

过去 7 天: 4

过去 30 天: 9

总计 289