跳转到主内容
  1. Unscrew the 7 6.4mm T5 Torx screws from back panel Use spudger to separate front and back panels Use spudger to separate front and back panels
    • Unscrew the 7 6.4mm T5 Torx screws from back panel

    • Use spudger to separate front and back panels

  2. The green grill is not screwed in so it can be pulled right out. The green grill is not screwed in so it can be pulled right out.
    • The green grill is not screwed in so it can be pulled right out.

  3. Remove the six 6.5mm T5 Torx screws. Remove power wires. Peel back copper tape and remove black and white wires.
    • Remove the six 6.5mm T5 Torx screws.

    • Remove power wires.

    • Peel back copper tape and remove black and white wires.

  4. Pull the battery apparatus out once all cables are removed.
    • Pull the battery apparatus out once all cables are removed.

  5. Cooling is important for electronics, the last thing they want is to overheat. Remove the two 7.3mm and four 8.4mm T5 Torx screws and remove the power cable. Once the screws and cable are removed, the fan can lift free
    • Cooling is important for electronics, the last thing they want is to overheat.

    • Remove the two 7.3mm and four 8.4mm T5 Torx screws and remove the power cable.

    • Once the screws and cable are removed, the fan can lift free

  6. The large board under everything is the logic board. Removing this requires unscrewing 6 screws, 2 7.3mm T5 Torx and 4 8.4mm T5 Torx located around the edges of the logic board, which should have already been taken out when removing the fan. Once all the screws are gone, be careful with the ports on top of the logic board. Gently wiggling helps.
    • The large board under everything is the logic board.

    • Removing this requires unscrewing 6 screws, 2 7.3mm T5 Torx and 4 8.4mm T5 Torx located around the edges of the logic board, which should have already been taken out when removing the fan.

    • Once all the screws are gone, be careful with the ports on top of the logic board. Gently wiggling helps.

结论

To reassemble your device, follow these instructions in reverse order.

3等其他人完成本指南。

Marc Perez

于2014年09月29日注册

539 信誉积分

创作了2篇指南

团队

USF Tampa, Team 1-1, Hickman Fall 2014 USF Tampa, Team 1-1, Hickman Fall 2014 的会员

USFT-HICKMAN-F14S1G1

4 名成员

创作了12篇指南

Hay ich suche Ersatzteile für Nvidia shield Portable ich suche Board da wo kühler drauf ist , weil mein ist kaput gegangen :(

Konstantin Styngu - 回复

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 4

总计 1,434