Numark N4 Disassembly

简介

This method of opening your Numark N4 only requires removing screws and prepares it for the repair guides featured here.

你所需要的

步骤 1 Numark N4 Disassembly

Numark N4 Disassembly, Numark N4 Disassembly: 步骤 1 中的图像 1，1

Turn the Numark N4 over so that the bottom panel is facing upwards.
Loosen and remove the 17 12mm screws from the bottom panel using a Phillips #2 screwdriver.

编辑

步骤 2

Using your fingers, gently pull apart the two panels of the device until you feel resistance from the cables.

编辑

步骤 3

Using your fingers, gently unplug the larger ribbon cable as pictured.

编辑

步骤 4

Using your fingers, gently unplug the smaller ribbon cable as pictured.

编辑

步骤 5

Using your fingers, gently unplug the yellow and red cable as pictured.

编辑

步骤 6

Open the two panels completely, gently placing each side on your working area to avoid damage to the buttons on the outside face.

编辑

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

作者

与2其他贡献者

Hunter Bassett

于10/10/17注册

104 声望

撰写一个指南

徽章: 5

+ 2更多徽章

团队

USF Tampa, Team S13-G11, Cagle Fall 2017 USF Tampa, Team S13-G11, Cagle Fall 2017 的会员

USFT-CAGLE-F17S13G11

4 名成员

创作了12篇指南

Numark N4 Disassembly

简介

你所需要的

步骤 1 Numark N4 Disassembly

添加评论

步骤 2

添加评论

步骤 3

添加评论

步骤 4

添加评论

步骤 5

添加评论

步骤 6

添加评论

作者

Hunter Bassett

团队

USF Tampa, Team S13-G11, Cagle Fall 2017 USF Tampa, Team S13-G11, Cagle Fall 2017 的会员

0条评论

添加评论

嵌入本指南

预览