跳转到主内容

修复你的物品

维修的权力

商店

简介

How to access and replace the motherboard. Be careful when taking off the back cover and make sure to carefully unplug all wires.

  1. Turn the device screen side down. Carefully remove the back piece with the iFixit opening tool. Carefully remove the back piece with the iFixit opening tool.
    • Turn the device screen side down.

    • Carefully remove the back piece with the iFixit opening tool.

  2. Remove the yellow tape covering the motherboard gently with your fingers.
    • Remove the yellow tape covering the motherboard gently with your fingers.

  3. Pull the camera plug upward and away from the motherboard with your fingers. Gently pull the camera from the device. The camera is held by tension. Gently pull the camera from the device. The camera is held by tension.
    • Pull the camera plug upward and away from the motherboard with your fingers.

    • Gently pull the camera from the device. The camera is held by tension.

  4. Carefully remove silver tape with your fingers.
    • Carefully remove silver tape with your fingers.

  5. Remove speakers gently using your fingers, they pop out easily. Disconnect cords attached to the speaker from white pod.
    • Remove speakers gently using your fingers, they pop out easily.

    • Disconnect cords attached to the speaker from white pod.

  6. Disconnect the press-fit black and red curly wire from where it connects on the motherboard.
    • Disconnect the press-fit black and red curly wire from where it connects on the motherboard.

  7. Gently remove the battery's three ZIF connectors from the motherboard. Use your fingers. Be careful not to puncture the battery. Be careful not to puncture the battery.
    • Gently remove the battery's three ZIF connectors from the motherboard. Use your fingers.

    • Be careful not to puncture the battery.

  8. Disconnect the battery's bundled cable connector from the motherboard with fingers. Disconnect the battery's bundled cable connector from the motherboard with fingers.
    • Disconnect the battery's bundled cable connector from the motherboard with fingers.

  9. Remove the four black 3.32mm screws on the corners of the motherboard using the Phillips #000 screwdriver. The motherboard should come out easily. Remove the four black 3.32mm screws on the corners of the motherboard using the Phillips #000 screwdriver. The motherboard should come out easily. Remove the four black 3.32mm screws on the corners of the motherboard using the Phillips #000 screwdriver. The motherboard should come out easily.
    • Remove the four black 3.32mm screws on the corners of the motherboard using the Phillips #000 screwdriver. The motherboard should come out easily.

结论

To reassemble your device, follow these instructions in reverse order.

Laila Schulz

于2019年02月14日注册

219 信誉积分

撰写一个指南

团队

USF Tampa, Team S1-G5, Leahy Spring 2019 USF Tampa, Team S1-G5, Leahy Spring 2019 的会员

USFT-LEAHY-S19S1G5

5 名成员

创作了6篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 7

总计 127