跳转到主内容

Nostalgia Electrics RHP-310 Replacing Housing Replacement

你所需要的

  1. Nostalgia Electrics RHP-310 Replacing Housing Replacement, Power Switch: 步骤 1 中的图像 1,1
    • Unplug the popper.

    • Lift the lid up to remove it.

  2. Nostalgia Electrics RHP-310 Replacing Housing Replacement: 步骤 2 中的图像 1,1
    • Lay the popper on its side.

    • Remove the five 12mm Philips #2 screws around the perimeter of the base with the Phillips #2 screwdriver.

    • Remove the two 15mm Philips #2 screws in the center of the base with the Phillips #2 screwdriver.

    • Put the removed screws in a safe place, they will be needed later to reattach the housing to the base.

  3. Nostalgia Electrics RHP-310 Replacing Housing Replacement: 步骤 3 中的图像 1,1
    • Flip the base over to view the interior of the base panel.

    • Unscrew the two 10 mm Philips #2 screws from the base panel.

    • Remove the base and set it aside.

  4. Nostalgia Electrics RHP-310 Replacing Housing Replacement: 步骤 4 中的图像 1,2 Nostalgia Electrics RHP-310 Replacing Housing Replacement: 步骤 4 中的图像 2,2
    • Locate the power switch connected to the side of the housing.

    • Pinch the sides of the power switch.

    • Push the power button up and out of the housing.

  5. Nostalgia Electrics RHP-310 Replacing Housing Replacement: 步骤 5 中的图像 1,1
    • Remove the wires connected to the power switch that should be detached from the housing.

    • Gently pry the wires loose from the power switch with the plastic opening tool.

    • The wires should easily pop out from the power switch.

  6. Nostalgia Electrics RHP-310 Replacing Housing Replacement: 步骤 6 中的图像 1,1
    • Remove the power switch from the housing unit.

    • You can now replace the power switch, if necessary.

  7. Nostalgia Electrics RHP-310 Replacing Housing Replacement, Replacing Housing: 步骤 7 中的图像 1,2 Nostalgia Electrics RHP-310 Replacing Housing Replacement, Replacing Housing: 步骤 7 中的图像 2,2
    • Gently remove the heating component from the popper.

    • Unscrew the four screws (11mm Philips #2 screws) that connect the white top to the housing.

    • Save the screws from this step. You will need them to connect the new housing to the white top.

  8. Nostalgia Electrics RHP-310 Replacing Housing Replacement: 步骤 8 中的图像 1,1
    • Remove the white top from the housing.

结论

To reassemble your device, follow these instructions in reverse order.

Dana Clarke

于09/26/12注册

50 声望

创作了6篇指南

团队

Cal Poly, Team 16-57, Forte Fall 2012 Cal Poly, Team 16-57, Forte Fall 2012 的会员

CPSU-FORTE-F12S16G57

5 名成员

创作了6篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 1

总计 501