跳转到主内容

配件

没有特定配件。

  1. Orient the phone as shown.
    • Orient the phone as shown.

    • Press the button with the plastic opening tool and slide the back case downward relative to the phone.

  2. Remove the battery cover by lifting it away from the phone.
    • Remove the battery cover by lifting it away from the phone.

  3. Insert the plastic opening tool into the marked space.
    • Insert the plastic opening tool into the marked space.

    • Lift up the side of the battery closest to the bottom edge of the phone using the plastic opening tool.

  4. iPhone X Fix Kits

    Warranty up? No worries, we’ve got the fix.

    现在开始购物

    iPhone X Fix Kits

    Warranty up? No worries, we’ve got the fix.

    现在开始购物
  5. Remove the battery from the phone.
    • Remove the battery from the phone.

  6. Insert the plastic opening tool in the marked areas in between the front and back covers. Pry each corner with the plastic opening tool until the front case completely detaches. Pry each corner with the plastic opening tool until the front case completely detaches.
    • Insert the plastic opening tool in the marked areas in between the front and back covers.

    • Pry each corner with the plastic opening tool until the front case completely detaches.

  7. Orient the phone so that the keypad is facing you. Remove the keypad by lifting it away from the phone. Remove the keypad by lifting it away from the phone.
    • Orient the phone so that the keypad is facing you.

    • Remove the keypad by lifting it away from the phone.

  8. Using T6 Torx screwdriver remove the six 15 mm torx screws. Using T6 Torx screwdriver remove the six 15 mm torx screws.
    • Using T6 Torx screwdriver remove the six 15 mm torx screws.

  9. Separate the front panel from the back by lifting the bottom of the front panel at a 45 degree angle. Remove the front panel by lifting the panel away from the phone at a 45 degree angle. Remove the front panel by lifting the panel away from the phone at a 45 degree angle.
    • Separate the front panel from the back by lifting the bottom of the front panel at a 45 degree angle.

    • Remove the front panel by lifting the panel away from the phone at a 45 degree angle.

  10. Locate the rear circuit board by flipping over the front panel. Locate the rear camera and by using the plastic opening tool, gently lift the camera out of the slot. Caution: Be careful when prying camera out of the slot for the connections are fragile.
    • Locate the rear circuit board by flipping over the front panel.

    • Locate the rear camera and by using the plastic opening tool, gently lift the camera out of the slot.

    • Caution: Be careful when prying camera out of the slot for the connections are fragile.

结论

To reassemble your device, follow these instructions in reverse order.

4等其他人完成本指南。

Justin

于2011年10月12日注册

933 信誉积分

创作了5篇指南

团队

Cal Poly, Team 6-2, Regan Fall 2011 Cal Poly, Team 6-2, Regan Fall 2011 的会员

CPSU-REGAN-F11S6G2

4 名成员

创作了10篇指南

mon nokia n70 est mal camera alors quest -ce qu*on va faire

sidiahmed ahmed - 回复

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 1

过去的30天: 5

总计 8,341