Press down on the button located at the bottom of the phone, using the center ridge as a guide. Pull the phone apart from the bottom, keeping the button pressed down.
  • Press down on the button located at the bottom of the phone, using the center ridge as a guide.

  • Pull the phone apart from the bottom, keeping the button pressed down.

  • CAUTION! The plastic opening tool may be used to gain leverage. Some force is required to open.

添加评论

Remove the back cover to expose the battery.
  • Remove the back cover to expose the battery.

添加评论

Place a finger or plastic opening tool in the gap between the battery and the phone. Gently lift the battery out.
  • Place a finger or plastic opening tool in the gap between the battery and the phone.

  • Gently lift the battery out.

添加评论

Locate the plastic latches on the left and right sides of the phone. Insert the plastic opening tool or a fingernail into each latch and pry them open individually.
  • Locate the plastic latches on the left and right sides of the phone.

  • Insert the plastic opening tool or a fingernail into each latch and pry them open individually.

  • CAUTION! Some force is required.

添加评论

Mac RAM Kits
Speed up your Mac. Max out its memory.
Mac RAM Kits
Get more memory out of your Mac.
Remove the faceplate with the number pad attached.
  • Remove the faceplate with the number pad attached.

添加评论

Turn the faceplate so the number pad faces downward.
  • Turn the faceplate so the number pad faces downward.

  • Lift the number pad out of the faceplate.

添加评论

Locate the six screws positions along the edges of the motherboard. Unscrew the six screws using the Torx 5 screwdriver (see Introduction for description of a Torx 5 screwdriver).
  • Locate the six screws positions along the edges of the motherboard.

  • Unscrew the six screws using the Torx 5 screwdriver (see Introduction for description of a Torx 5 screwdriver).

  • CAUTION! Place the screws in a secure location.

添加评论

Locate the orange ribbon tape connecting the metal display plate to the motherboard. Lift the black latch attaching the tape to the motherboard.
  • Locate the orange ribbon tape connecting the metal display plate to the motherboard.

  • Lift the black latch attaching the tape to the motherboard.

  • Gently pull the tape out of the latch slot to remove the metal display.

添加评论

Using the plastic opening tool, gently pry off the motherboard from the plastic shell. CAUTION! When pulling the motherboard out, be careful not to damage the battery under the lower left hand corner of the motherboard.
  • Using the plastic opening tool, gently pry off the motherboard from the plastic shell.

  • CAUTION! When pulling the motherboard out, be careful not to damage the battery under the lower left hand corner of the motherboard.

添加评论

Gently pull the orange ribbon tape up to remove the display.
  • Gently pull the orange ribbon tape up to remove the display.

  • Replace display screen.

  • Follow the instructions in reverse order to reassemble the phone.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

Ian VanZandt

于2012年02月14日注册

600 信誉积分

创作了9篇指南

团队

James Madison, Team 3-1, Klein Spring 2012 James Madison, Team 3-1, Klein Spring 2012 的会员

JMU-KLEIN-S12S3G1

3 名成员

创作了9篇指南

Pretty accurate, nice guide! Easily repaired and it works!

Dominik Fryč - 回复

Perfect guide! But Where can i get original components??

Navin Singh - 回复

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 12

总计 679