简介

This Guide will show how the remove the phone's battery charger connector.

配件

无需配件。

  1. Press the button to remove the back cover. Pull the cover downward and lift it off while still pressing the button.
    • Press the button to remove the back cover.

    • Pull the cover downward and lift it off while still pressing the button.

  2. Lift the battery out of the phone by pushing down from the top and pulling out
    • Lift the battery out of the phone by pushing down from the top and pulling out

  3. Grip the front cover from the bottom.
    • Grip the front cover from the bottom.

  4. Lift the front cover off.
    • Lift the front cover off.

  5. 所有超过US$100.00或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店
  6. Locate 6 screws on front of assembly and unscrew them using a T6 torx screwdriver.
    • Locate 6 screws on front of assembly and unscrew them using a T6 torx screwdriver.

  7. Insert spudger along edge of assembly and gently lift assembly away from case
    • Insert spudger along edge of assembly and gently lift assembly away from case

  8. Remove assembly from phone
    • Remove assembly from phone

  9. The logic board now sits on top of the phone.
    • The logic board now sits on top of the phone.

  10. Lift the logic board out of the phone.
    • Lift the logic board out of the phone.

  11. Locate battery charger connector
    • Locate battery charger connector

  12. Grasp top and bottom of battery charger connector on the left side
    • Grasp top and bottom of battery charger connector on the left side

  13. Lift out the battery charger connector
    • Lift out the battery charger connector

结论

To reassemble your device, follow these instructions in reverse order.

Colby Leslie

于2010年10月05日注册

1 信誉积分

创作了7篇指南

团队

Cal Poly, Team 22-3, Maness Fall 2010 Cal Poly, Team 22-3, Maness Fall 2010 的会员

CPSU-MANESS-F10S22G3

4 名成员

创作了9篇指南

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 1,797