简介

This guide is to instruct the reader how to disassemble the Nokia 6310i so that they can access the screen.

Press and hold the battery release button and slide the battery away from the Nokia logo
  • Press and hold the battery release button and slide the battery away from the Nokia logo

添加评论

Slide the SIM card lock away from the SIM card.
  • Slide the SIM card lock away from the SIM card.

  • The SIM card pops out. Remove the SIM card.

添加评论

  • Unscrew and remove the four T6 Torx screws.

Needs updating with a picture with no SIM card.

Mustafa - 回复

A comment for anyone wanting to clean the metal contacts to improve keypad response, make sure you spray iso alcohol onto a lint free cloth and wipe the contacts, not onto the device itself and definitely not onto the LCD screen, as it can leave a marl on the screen. Luckily it evaporated eventually but only after 48hrs...

John - 回复

  • Insert a plastic opening tool between the faceplate and the black backplate. Gently pry them apart, working from the lower end to the upper side of the phone.

添加评论

  • Use the plastic opening tool to separate the top part of the backplate.

  • The plastic clips at the top require slightly more force to separate.

添加评论

  • Remove the screw holding the antenna to the circuit board.

  • Carefully lift off the antenna from the circuit board.

添加评论

  • Lift off the motherboard from the faceplate.

添加评论

  • Remove the screen from the motherboard by carefully pushing the four tabs around the edge.

  • Carefully pull the screen away from the motherboard.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

3等其他人完成本指南。

Spencer Silvestre

于2010年09月30日注册

64 信誉积分

撰写一个指南

团队

Cal Poly, Team 14-41, Forte Fall 2010 Cal Poly, Team 14-41, Forte Fall 2010 的会员

CPSU-FORTE-F10S14G41

5 名成员

创作了16篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 3

过去的30天: 10

总计 6,447