1. Press and hold the battery release button and slide the battery away from the Nokia logo
    • Press and hold the battery release button and slide the battery away from the Nokia logo

    添加评论

  2. Slide the SIM card lock away from the SIM card.
    • Slide the SIM card lock away from the SIM card.

    • The SIM card pops out. Remove the SIM card.

    添加评论

    • Unscrew and remove the four T6 Torx screws.

    Needs updating with a picture with no SIM card.

    Mustafa - 回复

    A comment for anyone wanting to clean the metal contacts to improve keypad response, make sure you spray iso alcohol onto a lint free cloth and wipe the contacts, not onto the device itself and definitely not onto the LCD screen, as it can leave a marl on the screen. Luckily it evaporated eventually but only after 48hrs...

    John - 回复

  3. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Insert a plastic opening tool between the faceplate and the black backplate. Gently pry them apart, working from the lower end to the upper side of the phone.

    添加评论

    • Use the plastic opening tool to separate the top part of the backplate.

    • The plastic clips at the top require slightly more force to separate.

    添加评论

    • Remove the screw holding the antenna to the circuit board.

    • Carefully lift off the antenna from the circuit board.

    添加评论

    • Lift off the motherboard from the faceplate.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Mustafa

于2010年09月23日注册

139 信誉积分

创作了4篇指南

团队

Cal Poly, Team 14-41, Forte Fall 2010 Cal Poly, Team 14-41, Forte Fall 2010 的会员

CPSU-FORTE-F10S14G41

5 名成员

创作了16篇指南

This includes removing the antenna, since it's just one screw.

The antenna guide talks about "replacing the antenna."

Mustafa - 回复

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 15

总计 6,226