简介

Use this guide to remove and repair the logic board.

配件

无需配件。

  1. Press and hold the button at the bottom of the back side of the phone while sliding the back plate down to remove the back cover.
    • Press and hold the button at the bottom of the back side of the phone while sliding the back plate down to remove the back cover.

    • Note: Images on the right side may be hovered over to reveal larger versions.

    添加评论

  2. Lift up the battery from the inside of the phone.
    • Lift up the battery from the inside of the phone.

    • Make sure to lift up from the bottom of the battery as shown.

    添加评论

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Using a .208 head T-6 Screwdriver remove the two screws at the bottom of the battery cavity.

    添加评论

    • Use a plastic opening tool to remove the silver cover over the antenna.

    • The covering may not pop right off. It may require some prying in different locations around the top covering.

    添加评论

    • Remove the two newly revealed .208 inch screws at the top using a T-6 screwdriver.

    添加评论

    • WARNING: Use extreme caution when removing and handling the logic board as it is very fragile.

    • With caution, use a plastic prier to separate the back silver casing from the front of the phone. This may require force.

    • Disconnect the logic board from the small orange chip.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

Alex Graebe

于2010年04月15日注册

1 信誉积分

创作了2篇指南

团队

Cal Poly, Team 23-78, Johann Spring 2010 Cal Poly, Team 23-78, Johann Spring 2010 的会员

CPSU-JOHANN-S10S23G78

4 名成员

创作了5篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 2,552