跳转到主内容

本指南有最近更改,您可查看未经巡查的最新版本

Nokia 2610 Screen Replacement

你所需要的

  1. Nokia 2610 Screen Replacement, Battery and Sim Card: 步骤 1 中的图像 1,3 Nokia 2610 Screen Replacement, Battery and Sim Card: 步骤 1 中的图像 2,3 Nokia 2610 Screen Replacement, Battery and Sim Card: 步骤 1 中的图像 3,3
    • Place your thumb on the middle of the back cover and push it toward the bottom of the phone to slide the cover off.

  2. Nokia 2610 Screen Replacement: 步骤 2 中的图像 1,3 Nokia 2610 Screen Replacement: 步骤 2 中的图像 2,3 Nokia 2610 Screen Replacement: 步骤 2 中的图像 3,3
    • Use a plastic opening tool (or your finger) to gently pry the battery out of the battery slot on the back of the phone.

  3. Nokia 2610 Screen Replacement: 步骤 3 中的图像 1,3 Nokia 2610 Screen Replacement: 步骤 3 中的图像 2,3 Nokia 2610 Screen Replacement: 步骤 3 中的图像 3,3
    • Lift the metal sim card holder (at the bottom of the battery slot) up and carefully pry the sim card out of its slot with a plastic opening tool or your finger.

    • After removal, lower the metal sim card holder into its original position.

  4. Nokia 2610 Screen Replacement, Front Pannel: 步骤 4 中的图像 1,2 Nokia 2610 Screen Replacement, Front Pannel: 步骤 4 中的图像 2,2
    • Insert the plastic opening tool into the crack between the front and back panels.

    • Gently pry the front cover away from the back cover while sliding the plastic opening tool towards the top of the phone.

  5. Nokia 2610 Screen Replacement: 步骤 5 中的图像 1,2 Nokia 2610 Screen Replacement: 步骤 5 中的图像 2,2
    • Lift the bottom of the front cover away from the phone.

    • Continue lifting until the top of the front cover is fully removed from the phone.

    • Note: To replace the Keypad, gently lift it out of the front cover. It is located below the clear viewing window.

  6. Nokia 2610 Screen Replacement, Screen: 步骤 6 中的图像 1,1
    • Remove the 4 screws surrounding the screen using the precision T6 screwdriver.

  7. Nokia 2610 Screen Replacement: 步骤 7 中的图像 1,1
    • Lift the screen away from the phone and circuit board.

    • Warning: The screen is attached to the circuit board by a connector on the circuit board, so lift the screen straight up to avoid damage to the connector.

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

Andrew Wood

于10/05/10注册

336 声望

创作了3篇指南

团队

Cal Poly, Team 7-52, Amido Fall 2010 Cal Poly, Team 7-52, Amido Fall 2010 的会员

CPSU-AMIDO-F10S7G52

4 名成员

创作了12篇指南

一条评论

My Nokia 2610 dates from 2005 (or2006) and its screen was very scratched.

I bought a complete front cover replacement from vmobile.pl who were very efficient.

Andrew Wood’s instructions are crystal clear. The phone is as new now.

Many thanks. Andrew Boxall

Andrew - 回复

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 5

总计 3,100