修复你的物品 社区 商店

本指南有最近更改，您可查看未经巡查的最新版本。

Nintendo Wii Motherboard Cover Replacement

仅作为前提条件
本指南仅用作其他指南的先决条件。不能单独食用。

你所需要的

  1. Nintendo Wii Motherboard Cover Replacement, Motherboard Cover: 步骤 1 中的图像 1，1

    • Use a pair of tweezers to lift the fan connector up and out of its socket on the logic board.

    • Be sure your tweezers are clamped down on the fan connector, not the socket on the motherboard.

    翻译

  2. Nintendo Wii Motherboard Cover Replacement: 步骤 2 中的图像 1，2 Nintendo Wii Motherboard Cover Replacement: 步骤 2 中的图像 2，2

    • Remove the two 10 mm Phillips screws securing the fan to the fan shroud.

    • Remove the fan from the Wii.

    翻译

  3. Nintendo Wii Motherboard Cover Replacement: 步骤 3 中的图像 1，2 Nintendo Wii Motherboard Cover Replacement: 步骤 3 中的图像 2，2

    • Use the tip of a spudger or another fine-pointed tool to carefully pry one of the black plastic retaining fingers attached to the fan shroud away from the Wi-Fi antenna board.

    • Lift the Wi-Fi antenna out of the fan shroud.

    翻译

  4. Nintendo Wii Motherboard Cover Replacement: 步骤 4 中的图像 1，1

    • Remove the single 10 mm Phillips screw securing the second Wi-Fi antenna to the top of the fan shroud.

    翻译

  6. Nintendo Wii Motherboard Cover Replacement: 步骤 5 中的图像 1，1

    • Remove the two pieces of tape securing the second Wi-Fi antenna cable to the plastic bracket near the heat sink.

    翻译

  7. Nintendo Wii Motherboard Cover Replacement: 步骤 6 中的图像 1，1

    • Carefully de-route both antennas from the frame of the Wii and lay them aside.

    翻译

  8. Nintendo Wii Motherboard Cover Replacement: 步骤 7 中的图像 1，2 Nintendo Wii Motherboard Cover Replacement: 步骤 7 中的图像 2，2

    • Remove the three 10 mm Phillips screws securing the fan shroud to the Wii.

    • Lift the fan shroud off the heat sink and remove it from the Wii.

    翻译

  9. Nintendo Wii Motherboard Cover Replacement: 步骤 8 中的图像 1，3 Nintendo Wii Motherboard Cover Replacement: 步骤 8 中的图像 2，3 Nintendo Wii Motherboard Cover Replacement: 步骤 8 中的图像 3，3

    • Remove the following six screws securing the EMI fingers to the bottom panel:

    • Four 7 mm Phillips screws

    • Two 11.3 mm Phillips screws

    • Remove both sets of EMI fingers from the Wii.

    翻译

  10. Nintendo Wii Motherboard Cover Replacement: 步骤 9 中的图像 1，2 Nintendo Wii Motherboard Cover Replacement: 步骤 9 中的图像 2，2

    • Remove the following three screws:

    • One 7 mm Phillips screw

    • Two 10 mm Phillips screws

    • Lift the bracket out of the Wii.

    翻译

  11. Nintendo Wii Motherboard Cover Replacement: 步骤 10 中的图像 1，3 Nintendo Wii Motherboard Cover Replacement: 步骤 10 中的图像 2，3 Nintendo Wii Motherboard Cover Replacement: 步骤 10 中的图像 3，3

    • Remove the three 10 mm Phillips screws securing the black bracket to the bottom panel near the front of the Wii.

    • Slightly lift the bracket and use your other hand to pull the retaining clip away from where the Wi-Fi antennas enter the motherboard sheild.

    • Remove the bracket from the Wii.

    • Be sure not to lose the small square nut loosely held by the black plastic bracket.

    翻译

  12. Nintendo Wii Motherboard Cover Replacement: 步骤 11 中的图像 1，1

    • Remove the nine remaining 7 mm Phillips screws securing the motherboard cover to the bottom panel.

    翻译

  13. Nintendo Wii Motherboard Cover Replacement: 步骤 12 中的图像 1，1

    • Carefully lift the motherboard cover off the motherboard, minding any cables that may get caught.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 1

过去 30 天： 1

总计 974