修复你的物品 社区 商店

Nintendo Wii Faceplate Replacement

简介

Use this guide to replace your Wii's faceplate. Replacing the faceplate will provide new blue LEDs that light up around the optical drive opening.

你所需要的

  1. Nintendo Wii Faceplate Replacement, Faceplate: 步骤 1 中的图像 1，2 Nintendo Wii Faceplate Replacement, Faceplate: 步骤 1 中的图像 2，2

    • Use a metal spudger to remove the white plastic screw covers stuck to the lower case near the front of the Wii.

    翻译

  2. Nintendo Wii Faceplate Replacement: 步骤 2 中的图像 1，1

    • Remove the two 8.3 mm Tri-Wing screws hidden under the covers you just removed.

    翻译

  4. Nintendo Wii Faceplate Replacement: 步骤 3 中的图像 1，1

    • Remove the single 5.9 mm Phillips screw under the controller port door nearest the faceplate.

    翻译

  5. Nintendo Wii Faceplate Replacement: 步骤 4 中的图像 1，1

    • Use a metal spudger to remove the rubber foot stuck to the side of the Wii near the DVD drive opening.

    翻译

  6. Nintendo Wii Faceplate Replacement: 步骤 5 中的图像 1，1

    • Remove the single 5.9 mm Phillips screw hidden under the foot you just removed.

    翻译

  7. Nintendo Wii Faceplate Replacement: 步骤 6 中的图像 1，2 Nintendo Wii Faceplate Replacement: 步骤 6 中的图像 2，2

    • Carefully pull the faceplate away from the front of the Wii.

    • Use a pair of tweezers to disconnect the LED cable's plastic connector from the motherboard.

    • Remove the faceplate.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

22等其他人完成本指南。

3条评论

Any more to do if pressing the on button does nothing, its still red power light?

Kyrre - 回复

Tanks for this guide Btw

Kyrre - 回复

Thanks for the guide, I just wish it continued with replacing the components within the faceplate, as I wanted to replace the white shell. Still helpful though!

Cynthia - 回复

添加评论

浏览统计数据:

过去 24 小时： 9

过去 7 天： 50

过去 30 天： 331

总计 53,319