Skip to main content

介绍

The back cover is the only layer between the motherboard and the many things things that can ruin the motherboard. Expect the six screws that hold the cover to the device to be fastened tightly.

配件

没有特定配件。

  1. Use a standard Phillips #00 screwdriver to loosen the 4mm screw that keeps the battery cover attached to the device.
    • Use a standard Phillips #00 screwdriver to loosen the 4mm screw that keeps the battery cover attached to the device.

  2. Lift the battery cover up and remove it from the device.
    • Lift the battery cover up and remove it from the device.

    • The screw will remain attached to the battery cover because of Nintendo's design.

  3. Android 维修工具包

    一个新的屏幕或电池就在一个套件之内。

    现在开始购物

    Android 维修工具包

    一个新的屏幕或电池就在一个套件之内。

    现在开始购物
  4. Use your fingers or a plastic opening tool to remove the battery from the device.
    • Use your fingers or a plastic opening tool to remove the battery from the device.

  5. Using the tri-wing screwdriver, unscrew the screws holding the back cover to the device. The six screws that need to be removed include: Four #00 6.45mm tri-wing screws that are located at the corners of the device.
    • Using the tri-wing screwdriver, unscrew the screws holding the back cover to the device. The six screws that need to be removed include:

    • Four #00 6.45mm tri-wing screws that are located at the corners of the device.

    • Two #00 4.6mm tri-wing screws that are located at the top-center and bottom-center of the device.

  6. Lift the back cover off of the device.
    • Lift the back cover off of the device.

结论

To reassemble your device, follow these instructions in reverse order.

15等其他人完成本指南。

Rocco Lattanzio

于2013年01月11日注册

680 Reputation

创作了2篇指南

Team

Cal Poly, Team 17-22, Forte Winter 2013 Cal Poly, Team 17-22, Forte Winter 2013 的会员

CPSU-FORTE-W13S17G22

4 名成员

创作了19篇指南

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 6

Past 7 Days: 28

Past 30 Days: 139

All Time: 15,575