修复你的物品 社区 商店

Nintendo Entertainment System Disassembly

简介

Disassembly of the NES. Use this guide to learn how to open the system and replace items such as the 72-pin connector, controller ports/buttons, & plastics.

你所需要的

  1. Nintendo Entertainment System Disassembly, Remove Top Housing: 步骤 1 中的图像 1，2 Nintendo Entertainment System Disassembly, Remove Top Housing: 步骤 1 中的图像 2，2

    • Remove six 13.25mm Phillips screws on the bottom of the system.

    • The screws are recessed about 40mm.

    • Once all screws are removed, simply lift the bottom half away from the top housing.

    编辑

  2. Nintendo Entertainment System Disassembly, Remove Top RF Shield: 步骤 2 中的图像 1，3 Nintendo Entertainment System Disassembly, Remove Top RF Shield: 步骤 2 中的图像 2，3 Nintendo Entertainment System Disassembly, Remove Top RF Shield: 步骤 2 中的图像 3，3

    • Remove seven 13.25mm Phillips screws around the perimeter of the RF shield.

    • Lift the RF shield up and away from the system and place aside.

    编辑

  3. Nintendo Entertainment System Disassembly, Remove Cartridge Tray: 步骤 3 中的图像 1，3 Nintendo Entertainment System Disassembly, Remove Cartridge Tray: 步骤 3 中的图像 2，3 Nintendo Entertainment System Disassembly, Remove Cartridge Tray: 步骤 3 中的图像 3，3

    • Remove four 13.25mm Phillips screws from the four corners of the cartridge tray.

    • Your system may only have two screws on the bottom

    • Remove two 17.25mm Phillips screws from the top of cartridge tray.

    • Once free, slide the cartridge tray towards you and then lift slightly in the front to remove.

    编辑

  4. Nintendo Entertainment System Disassembly, Remove Motherboard Pt. 1: 步骤 4 中的图像 1，3 Nintendo Entertainment System Disassembly, Remove Motherboard Pt. 1: 步骤 4 中的图像 2，3 Nintendo Entertainment System Disassembly, Remove Motherboard Pt. 1: 步骤 4 中的图像 3，3

    • Remove three 13.25mm Phillips screws to free the motherboard from the bottom housing.

    • Carefully lift the motherboard and turn it over to find the wired connections.

    编辑

  6. Nintendo Entertainment System Disassembly, Remove Motherboard Pt. 2: 步骤 5 中的图像 1，2 Nintendo Entertainment System Disassembly, Remove Motherboard Pt. 2: 步骤 5 中的图像 2，2

    • Disconnect the wired connections from the motherboard.

    • Player 1 (Shorter wires)

    • Player 2 (Longer wires)

    • Power/Reset Buttons

    编辑

  7. Nintendo Entertainment System Disassembly, Remove Bottom RF Shield: 步骤 6 中的图像 1，2 Nintendo Entertainment System Disassembly, Remove Bottom RF Shield: 步骤 6 中的图像 2，2

    • The bottom RF shield is held on by tension around the expansion port. Lift the shield up and away from the motherboard.

    编辑

  8. Nintendo Entertainment System Disassembly, Remove 72-Pin Connector: 步骤 7 中的图像 1，2 Nintendo Entertainment System Disassembly, Remove 72-Pin Connector: 步骤 7 中的图像 2，2

    • To remove the 72-Pin connector, apply force to each edge and slide the connector off the contacts on the motherboard.

    编辑

  9. Nintendo Entertainment System Disassembly, Remove Power/Reset Buttons: 步骤 8 中的图像 1，2 Nintendo Entertainment System Disassembly, Remove Power/Reset Buttons: 步骤 8 中的图像 2，2

    • Remove two 13.25mm Phillips screws from the button assembly. Lift slightly in the back and then up and away from the housing to remove.

    编辑

  10. Nintendo Entertainment System Disassembly, Remove Controller Ports: 步骤 9 中的图像 1，3 Nintendo Entertainment System Disassembly, Remove Controller Ports: 步骤 9 中的图像 2，3 Nintendo Entertainment System Disassembly, Remove Controller Ports: 步骤 9 中的图像 3，3

    • Remove two 7.25mm Phillips screws from the bottom of the system. Lift the controller port faceplate up and away.

    • Remove the controller ports by feeding them through the port holes to the front of the housing.

    • When reassembling, Player 1 (Left) has shorter wires that Player 2 (Right).

    编辑

  11. Nintendo Entertainment System Disassembly, Remove Plastic Door and Accent Pieces: 步骤 10 中的图像 1，3 Nintendo Entertainment System Disassembly, Remove Plastic Door and Accent Pieces: 步骤 10 中的图像 2，3 Nintendo Entertainment System Disassembly, Remove Plastic Door and Accent Pieces: 步骤 10 中的图像 3，3

    • Remove seven 7.25mm small flathead screws from the inside of the top housing.

    • Two of these screws also hold a spring for the door. When reassembling, refer to the keyed shape of the plastic to orient these correctly.

    编辑

  12. Nintendo Entertainment System Disassembly, Disassembly Complete!: 步骤 11 中的图像 1，2 Nintendo Entertainment System Disassembly, Disassembly Complete!: 步骤 11 中的图像 2，2

    • Screw List

    • (19x) 13.25mm Phillips

    • (2x) 17.25mm Phillips

    • (2x) 7.25mm Phillips (Silver, large cap)

    • (7x) 7.25mm Flathead (Silver, small)

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

14等其他人完成本指南。

作者

与1其他贡献者

Joe Shacar

于06/01/21注册

945 声望

撰写一个指南

徽章: 9

+ 6更多徽章

2条评论

Thank you very much!

Haihatsu - 回复

Love step by step

Rene Leon - 回复

添加评论

浏览统计数据:

过去 24 小时： 15

过去 7 天： 122

过去 30 天： 618

总计 16,104