跳转到主内容

本指南有最近更改,您可查看未经巡查的最新版本

Nintendo DSi XL Power Board Replacement

你所需要的

  1. Nintendo DSi XL Power Board Replacement, Battery: 步骤 1 中的图像 1,2 Nintendo DSi XL Power Board Replacement, Battery: 步骤 1 中的图像 2,2
    • Remove the two Phillips screws securing the battery cover to the back of the handheld console.

    • Lift the battery cover off the back of the DSi XL.

  2. Nintendo DSi XL Power Board Replacement: 步骤 2 中的图像 1,1
    • Lift the battery from the DSi XL.

  3. Nintendo DSi XL Power Board Replacement, Lower Case: 步骤 3 中的图像 1,3 Nintendo DSi XL Power Board Replacement, Lower Case: 步骤 3 中的图像 2,3 Nintendo DSi XL Power Board Replacement, Lower Case: 步骤 3 中的图像 3,3
    • Remove the four rubber screw covers on the lower case by prying them up with a push pin.

  4. Nintendo DSi XL Power Board Replacement: 步骤 4 中的图像 1,1
    • Remove the following seven Phillips screws that secure the lower case to the rest of the DSi XL:

    • Four silver 5.3 mm screws

    • Two black 5.3 mm screws

    • One black 2.5 mm screw

  5. Nintendo DSi XL Power Board Replacement: 步骤 5 中的图像 1,3 Nintendo DSi XL Power Board Replacement: 步骤 5 中的图像 2,3 Nintendo DSi XL Power Board Replacement: 步骤 5 中的图像 3,3
    • Turn the DSi XL over, and open the display.

    • Insert a spudger between the upper and lower case at the bottom left corner of the DSi.

    • Slide the spudger along the bottom edge of the upper case to release the latches securing the upper case to the lower case.

  6. Nintendo DSi XL Power Board Replacement: 步骤 6 中的图像 1,2 Nintendo DSi XL Power Board Replacement: 步骤 6 中的图像 2,2
    • Close the display and turn the DSi XL over.

    • Lift the lower case from the front edge.

    • Rotate the lower case away from the DSi.

    • The lower case cannot be completely removed yet, since it is still connected to the motherboard.

  7. Nintendo DSi XL Power Board Replacement: 步骤 7 中的图像 1,2 Nintendo DSi XL Power Board Replacement: 步骤 7 中的图像 2,2
    • Using a spudger, pry the SD card/right shoulder button connector off its socket.

    • Pry the volume button/left shoulder button connector off its socket on the motherboard with a spudger.

  8. Nintendo DSi XL Power Board Replacement, Power Board: 步骤 8 中的图像 1,2 Nintendo DSi XL Power Board Replacement, Power Board: 步骤 8 中的图像 2,2
    • Using the flat end of a spudger, flip up the retaining flap on the ZIF connector for the D-pad/power button cable.

    • With the pointed end of the spudger, pull the D-pad/power button cable from its connector on the motherboard.

  9. Nintendo DSi XL Power Board Replacement: 步骤 9 中的图像 1,1
    • Using the flat end of the spudger, carefully pry the battery cable out of its socket on the motherboard.

    • Use caution, as the wires are very fragile and could come out of the connector if pulled on too hard.

  10. Nintendo DSi XL Power Board Replacement: 步骤 10 中的图像 1,2 Nintendo DSi XL Power Board Replacement: 步骤 10 中的图像 2,2
    • Remove the seven 2.5 mm silver screws securing the power board to the upper case.

    • Lift the power board off the upper case.

结论

To reassemble your device, follow these instructions in reverse order.

6等其他人完成本指南。

Brett Hartt

于04/12/10注册

127,749 声望

创作了143篇指南

团队

iFixit iFixit 的会员

Staff

136 名成员

创作了16,579篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 9

过去 30 天: 66

总计 16,958