修复你的物品 社区 商店

Nintendo 64 Rumble Pak Battery Replacement

简介

Does your Rumble Pak no longer vibrate? Learn how to check for corrosion and replace the batteries in your Rumble Pak to continue enjoying the ultimate gaming experience.

你所需要的

  1. Nintendo 64 Rumble Pak Battery Replacement, Rumble Pak Battery: 步骤 1 中的图像 1，1

    • Remove the Rumble Pak from the controller by pressing the release button and pulling the Rumble Pak out.

    编辑

  2. Nintendo 64 Rumble Pak Battery Replacement: 步骤 2 中的图像 1，1

    • Remove the battery cover from the Rumble Pak by pressing the tab and pulling the cover up.

    编辑

  4. Nintendo 64 Rumble Pak Battery Replacement: 步骤 3 中的图像 1，1

    • Press each battery toward the spring, then pull toward you to remove the batteries from the Rumble Pak.

    • When inserting the new batteries, make sure the positive (+) end of the battery touches the flat piece, and the negative (-) end touches the spring.

    编辑

  5. Nintendo 64 Rumble Pak Battery Replacement: 步骤 4 中的图像 1，3 Nintendo 64 Rumble Pak Battery Replacement: 步骤 4 中的图像 2，3 Nintendo 64 Rumble Pak Battery Replacement: 步骤 4 中的图像 3，3

    • Check for corrosion around the springs and the flat plate where the batteries touch.

    • Do not touch the corrosion. It may be battery acid.

    • Use a flat head screwdriver to chisel away the corrosion, and use a Q-tip to wipe it clean.

    • Do not use water to wet the Q-tip, as water can damage the Rumble Pak.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与2其他贡献者

Carly Bowen

于07/20/15注册

304 声望

撰写一个指南

徽章: 5

+ 2更多徽章

团队

Texas Tech, Team 3-6, Rauch SU 2015 Texas Tech, Team 3-6, Rauch SU 2015 的会员

TTU-RAUCH-SU15S3G6

3 名成员

创作了2篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 2

过去 7 天： 5

过去 30 天： 30

总计 4,013