修复你的物品 社区 商店

本指南有最近更改，您可查看未经巡查的最新版本。

Nintendo 3DS Lower Case Replacement

简介

Remove your broken Nintendo 3DS lower case and replace it with a fresh one.

你所需要的

  1. Nintendo 3DS Lower Case Replacement, Back Cover: 步骤 1 中的图像 1，1

    • Unscrew the four Phillips #00 screws along the top of the back cover.

    • The screws are held in place by locking washers, and will not come out of the back cover.

    • The comments section is full of unlucky souls who will tell you that the screws here through step 4 will strip incredibly easily. Press down fairly hard, and go slow.

    翻译

  2. Nintendo 3DS Lower Case Replacement: 步骤 2 中的图像 1，2 Nintendo 3DS Lower Case Replacement: 步骤 2 中的图像 2，2

    • Hold the device in one hand and turn it over.

    • Grab the top edge of the back cover with your opposite hand so that the cover does not fall back into place.

    • Flip the 3DS over again so that the back cover is facing up.

    • Pull the back cover up and away from the rest of the device to remove it.

    翻译

  4. Nintendo 3DS Lower Case Replacement, Battery: 步骤 3 中的图像 1，3 Nintendo 3DS Lower Case Replacement, Battery: 步骤 3 中的图像 2，3 Nintendo 3DS Lower Case Replacement, Battery: 步骤 3 中的图像 3，3

    • Insert a plastic opening tool into the notch in the lower case above the battery.

    • Pry the battery up with the plastic opening tool.

    • Grab the top edge of the battery and lift it out of the lower case.

    翻译

  5. Nintendo 3DS Lower Case Replacement, Lower Case: 步骤 4 中的图像 1，1

    • Remove the nine 6.3 mm black Phillips screws from the lower case.

    • Remove the 2.4 mm silver Phillips screw above the game cartridge slot.

    翻译

  6. Nintendo 3DS Lower Case Replacement: 步骤 5 中的图像 1，3 Nintendo 3DS Lower Case Replacement: 步骤 5 中的图像 2，3 Nintendo 3DS Lower Case Replacement: 步骤 5 中的图像 3，3

    • Lift the bottom edge of the lower case off the rest of the 3DS.

    • There are still two ribbon cables connecting the mother board to the case, so be sure not to pull the lower case all the way off.

    • Use a plastic opening tool to pry the shoulder button ribbon cables off their sockets on the motherboard.

    • Remove the lower case from the device.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

7等其他人完成本指南。

作者

与5其他贡献者

David Hodson

于04/13/10注册

150,467 声望

创作了127篇指南

徽章: 53

+ 50更多徽章

2条评论

Is this guide for the original 3ds?

Glenn Racz - 回复

yessir it is

Electronik -

添加评论

浏览统计数据:

过去 24 小时： 4

过去 7 天： 26

过去 30 天： 112

总计 15,672