修复你的物品 社区 商店

Ninja Professional Blender BL660 Blender Base Replacement

简介

This guide will show how to remove the outer and inner blender base and sections from your Ninja Professional Blender BL660 Blender. This will allow you to get access to the inner components.

你所需要的

  1. Ninja Professional Blender BL660 Blender Base Replacement, Blender Base: 步骤 1 中的图像 1，2 Ninja Professional Blender BL660 Blender Base Replacement, Blender Base: 步骤 1 中的图像 2，2

    • Using the Phillips #1 screwdriver, remove the 5 screws (13mm long, 6mm wide) holding the outer base.

    • Lift the base up to remove it.

    编辑

  2. Ninja Professional Blender BL660 Blender Base Replacement: 步骤 2 中的图像 1，2 Ninja Professional Blender BL660 Blender Base Replacement: 步骤 2 中的图像 2，2

    • Remove the midsection by pulling it up. If the section is stuck, use the iFixit plastic opening tool to pry it off.

    • Pull the power cord through the mid-section opening.

    编辑

  4. Ninja Professional Blender BL660 Blender Base Replacement: 步骤 3 中的图像 1，2 Ninja Professional Blender BL660 Blender Base Replacement: 步骤 3 中的图像 2，2

    • Using the Phillips #1 screwdriver, remove the 6 screws (13 mm long, 6 mm wide).

    编辑

  5. Ninja Professional Blender BL660 Blender Base Replacement: 步骤 4 中的图像 1，2 Ninja Professional Blender BL660 Blender Base Replacement: 步骤 4 中的图像 2，2

    • Using the Phillips #1 screwdriver, remove the two screws (5 mm long, 3 mm wide) holding the power cord onto the motor cover.

    编辑

  6. Ninja Professional Blender BL660 Blender Base Replacement: 步骤 5 中的图像 1，2 Ninja Professional Blender BL660 Blender Base Replacement: 步骤 5 中的图像 2，2

    • Using the iFixit plastic opening tool, pry the motor cover off the general housing. Once it is loose, lift it up to remove it off the base.

    • Slide the cover all the way to the end of the power cord.

    • Please note that the power cord does not completely come off the cover.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

0条评论

添加评论

浏览统计数据:

过去 24 小时： 4

过去 7 天： 15

过去 30 天： 59

总计 2,792