跳转到主内容

修复你的物品

维修的权力

商店

简介

The Ninja Professional Blender 1100 watt blade housing is simple to replace and can be accomplished by any Ninja user.

  1. Unplug blender.
    • Unplug blender.

    • Remove the pitcher from the base by turning it counter clockwise so the pitcher is not aligned with the arrows on the base.

  2. Press the release button on top of the lid. Pull the lid off.
    • Press the release button on top of the lid.

    • Pull the lid off.

    • Use both hands when taking off the lid. You may need to pull hard if there is water between the lid and the pitcher, which will create a tight suction.

  3. Blades are very sharp.
    • Blades are very sharp.

    • Use one hand to pull the blade housing out of the pitcher while using the other hand to hold onto the pitcher handle.

  4. Insert the new blade house into the pitcher and align it so it fits onto the mounting gear. Insert the new blade house into the pitcher and align it so it fits onto the mounting gear.
    • Insert the new blade house into the pitcher and align it so it fits onto the mounting gear.

结论

To reassemble your device, follow these instructions in reverse order.

3等其他人完成本指南。

Elizabeth Hernandez

于2015年09月14日注册

243 信誉积分

撰写一个指南

团队

CSU Fullerton, Team 1-1, Bruce Fall 2015 CSU Fullerton, Team 1-1, Bruce Fall 2015 的会员

CSUF-BRUCE-F15S1G1

4 名成员

创作了1篇指南

添加评论

浏览统计数据:

过去的24小时: 2

过去的7天: 9

过去的30天: 35

总计 939