Ninja Professional BL610 LED Replacement - iFixit 维修指南

简介

Use this guide to replace the LED on the circuit board of your device.

你所需要的

步骤 1 LED

Ninja Professional BL610 LED Replacement, LED: 步骤 1 中的图像 1，1

Remove six screws (12mm long, 6mm head diameter) from bottom of the blender using a Phillips #2 screwdriver.

步骤 2

Ninja Professional BL610 LED Replacement: 步骤 2 中的图像 1，1

Remove six screws (12mm long, 6mm head diameter) from component housing using Phillips #2 screwdriver.

步骤 3

Ninja Professional BL610 LED Replacement: 步骤 3 中的图像 1，1

Remove five screws from circuit board using Phillips #2 screwdriver.

步骤 4

Ninja Professional BL610 LED Replacement: 步骤 4 中的图像 1，1

Once the screws are removed, lift the circuit board to access the back.

步骤 5

Ninja Professional BL610 LED Replacement: 步骤 5 中的图像 1，1

Locate the LED you wish to replace and note its position on the opposite side of the circuit board.

步骤 6

Ninja Professional BL610 LED Replacement: 步骤 6 中的图像 1，1

Desolder both of the LED leads and remove the LED light. Note the orientation of LED, this is important for replacing the LED. The Replacement LED needs to be soldered in the same orientation.

结论

To reassemble your device, follow these instructions in reverse order.

作者

与1其他贡献者

Rosniel Castro

于09/27/17注册

482 声望

创作了4篇指南

+ 5更多徽章

团队

USF Tampa, Team S14-G3, Boczar Fall 2017 USF Tampa, Team S14-G3, Boczar Fall 2017 的会员

USFT-BOCZAR-F17S14G3

4 名成员

创作了4篇指南

0条评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 4

总计 136