Ninja Professional BL610 Button Replacement - iFixit 维修指南

简介

Use this guide to replace the buttons on your device.

你所需要的

步骤 1 Button

Ninja Professional BL610 Button Replacement, Button: 步骤 1 中的图像 1，1

Remove six screws (12mm long, 6mm head diameter) from bottom of the blender using a Phillips #2 screwdriver.

步骤 2

Ninja Professional BL610 Button Replacement: 步骤 2 中的图像 1，1

Remove six screws (12mm long, 6mm head diameter) from component housing using Phillips #2 screwdriver.

步骤 3

Ninja Professional BL610 Button Replacement: 步骤 3 中的图像 1，1

Remove five screws from circuit board using Phillips #2 screwdriver.

步骤 4

Ninja Professional BL610 Button Replacement: 步骤 4 中的图像 1，1

Once the screws are removed, lift the circuit board to access the back.

步骤 5

Ninja Professional BL610 Button Replacement: 步骤 5 中的图像 1，1

Locate the button you wish to replace and note its position on the opposite side of the circuit board. They are marked with the letters ¨sw¨ on the circuit board.

步骤 6

Ninja Professional BL610 Button Replacement: 步骤 6 中的图像 1，1

Using a soldeing gun and soldering wick,desolder the for connection points and remove the button.

结论

To reassemble your device, follow these instructions in reverse order.

作者

与1其他贡献者

Rosniel Castro

于09/27/17注册

482 声望

创作了4篇指南

+ 5更多徽章

团队

USF Tampa, Team S14-G3, Boczar Fall 2017 USF Tampa, Team S14-G3, Boczar Fall 2017 的会员

USFT-BOCZAR-F17S14G3

4 名成员

创作了4篇指南

0条评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 1

过去 30 天： 1

总计 162