修复你的物品 社区 商店

Ninja Mega Kitchen System BL770 Circuit Base Replacement

简介

This will work as a prerequisite guide for all other guides. This helps us break down the device into the main base layer.

你所需要的

  1. Ninja Mega Kitchen System BL770 Circuit Base Replacement, Circuit Base: 步骤 1 中的图像 1，2 Ninja Mega Kitchen System BL770 Circuit Base Replacement, Circuit Base: 步骤 1 中的图像 2，2

    • Remove the five screws (13mm long, 6mm head) attaching the Base Cover using a Phillips screwdriver (Ph2).

    • Remove the two screws (13 mm long, 6mm head) attaching the Base Cover using a T10 screwdriver.

    编辑

  2. Ninja Mega Kitchen System BL770 Circuit Base Replacement: 步骤 2 中的图像 1，1

    • Carefully remove the second layer from the base. You will not need a screwdriver for this step.

    编辑

  4. Ninja Mega Kitchen System BL770 Circuit Base Replacement: 步骤 3 中的图像 1，3 Ninja Mega Kitchen System BL770 Circuit Base Replacement: 步骤 3 中的图像 2，3 Ninja Mega Kitchen System BL770 Circuit Base Replacement: 步骤 3 中的图像 3，3

    • Remove the 2 screws (13mm, 6mm head) connected to the plastic piece holding down the power cord.

    • Then remove the additional 4 screws (13mm, 6mm head) and 2 screws (11mm, 5mm head) securing the base.

    • Carefully lift the base up from the rest of the blender.

    编辑

  5. Ninja Mega Kitchen System BL770 Circuit Base Replacement: 步骤 4 中的图像 1，1

    • Remove 4 screws (11mm, 4mm head) connecting the circuit board to the base.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

一条评论

Hey Tommee where can I get a circuit board for the ninja bl 773.

Bhesham Sochan - 回复

添加评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 8

过去 30 天： 36

总计 1,347