修复你的物品 社区 商店

Ninja Kitchen System Pulse Motor Replacement

简介

You will learn how to remove the motor from the base to check for frayed wires and/or loose screws.

你所需要的

  1. Ninja Kitchen System Pulse Motor Replacement, Base Disassembly: 步骤 1 中的图像 1，1

    • Take out the three 15 mm Phillips #1 screws.

    • Remove the 15mm T10 screw.

    • Place the 4 screws on the magnetic mat.

    编辑

  2. Ninja Kitchen System Pulse Motor Replacement: 步骤 2 中的图像 1，1

    • Remove the gray base by lifting upwards and placing to the side.

    编辑

  4. Ninja Kitchen System Pulse Motor Replacement, Motor: 步骤 3 中的图像 1，1

    • Remove the three 15 mm Phillips #1 screws.

    • Place screws on magnetic mat.

    编辑

  5. Ninja Kitchen System Pulse Motor Replacement: 步骤 4 中的图像 1，1

    • Remove the motor by gently lifting up. Be careful with the cords, as they may be tangled.

    • This is the entire motor for the Ninja. If you have access to a spare motor, simply swap out the motors.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

作者

与4其他贡献者

DJ

于01/20/16注册

122 声望

撰写一个指南

徽章: 4

+1个徽章

团队

USF Tampa, Team 15-1, Remmell Spring 2016 USF Tampa, Team 15-1, Remmell Spring 2016 的会员

USFT-REMMELL-S16S15G1

3 名成员

创作了5篇指南

一条评论

Dear sir my ninga kitchen system 1100 (blender machine) motor rod is broken i need help to replace it where i can get the rod or repair shop near me thank you

Noman - 回复

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 10

总计 4,279