修复你的物品 社区 商店

Ninja Coffee Bar® Single-Serve System Water Reservoir Hanger Replacement

简介

The water reservoir hanger is located on the left side of the brew basket and filter. This small component is crucial for making sure the water reservoir is secure and attached to the rest of the device. Follow this guide to replace the water reservoir hanger and resecure your water reservoir.

你所需要的

  1. Ninja Coffee Bar® Single-Serve System Water Reservoir Hanger Replacement, Water Reservoir Clip: 步骤 1 中的图像 1，2 Ninja Coffee Bar® Single-Serve System Water Reservoir Hanger Replacement, Water Reservoir Clip: 步骤 1 中的图像 2，2

    • Remove single 6mm #1 Phillips head screw from the side of the unit and four 6mm screws from under the basket area.

    编辑

  3. Ninja Coffee Bar® Single-Serve System Water Reservoir Hanger Replacement: 步骤 2 中的图像 1，2 Ninja Coffee Bar® Single-Serve System Water Reservoir Hanger Replacement: 步骤 2 中的图像 2，2

    • Gently pry the upper panel up from the unit.

    编辑

  4. Ninja Coffee Bar® Single-Serve System Water Reservoir Hanger Replacement: 步骤 3 中的图像 1，1

    • Inside the panel, remove the two 6mm #1 Phillips head screws. Remove and replace water reservoir clip as necessary.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与3其他贡献者

CJ Berg

于11/05/18注册

444 声望

创作了4篇指南

徽章: 5

+ 2更多徽章

团队

UMass Dartmouth, Team S5-G4, Gulbrandsen Fall 2018 UMass Dartmouth, Team S5-G4, Gulbrandsen Fall 2018 的会员

UMASSD-GULBRANDSEN-F18S5G4

3 名成员

创作了5篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 5

过去 30 天： 7

总计 807