跳转到主内容

简介

Is the lens mount in your camera damaged or broken? It might be time to replace it with a new one! This guide will explain how to replace the lens mount (also known as bayonet mount) in a Nikon N80/F80 Camera.

配件

没有特定配件。

  1. Make sure the On/Off switch is in the Off position.
    • Make sure the On/Off switch is in the Off position.

  2. Place the camera so the lens is facing up.
    • Place the camera so the lens is facing up.

    • If your camera has a lens on, remove it by pushing and holding the lens release button and turning the lens clockwise until it comes off.

  3. Use a PH00 Phillips screwdriver to remove the five 4.8mm screws on the silver lens mount.
    • Use a PH00 Phillips screwdriver to remove the five 4.8mm screws on the silver lens mount.

  4. Remove the old lens mount and place the new one on.
    • Remove the old lens mount and place the new one on.

结论

To reassemble your device, follow these instructions in reverse order.

Maegan Viloria

于2015年09月14日注册

651 信誉积分

创作了5篇指南

团队

CSU Fullerton, Team 1-7, Bruce Fall 2015 CSU Fullerton, Team 1-7, Bruce Fall 2015 的会员

CSUF-BRUCE-F15S1G7

3 名成员

创作了6篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 12

总计 750