跳转到主内容

简介

Is the gear belt for film winding in your camera broken or has a tear? Try your hand at replacing it to make your camera work again. This guide will explain how to replace the gear belt in a Nikon N80/F80 Camera.

配件

没有特定配件。

  1. Make sure the On/Off switch is in the Off position.
    • Make sure the On/Off switch is in the Off position.

  2. Rotate the camera so the bottom plate is accessible. Remove the seven 4.8mm screws on the bottom plate of the camera using a PH00 Phillips screwdriver.
    • Rotate the camera so the bottom plate is accessible.

    • Remove the seven 4.8mm screws on the bottom plate of the camera using a PH00 Phillips screwdriver.

    • Remove the bottom plate.

  3. Remove the eight 4.8mm screws holding on the metal plate. Remove the metal plate.
    • Remove the eight 4.8mm screws holding on the metal plate.

    • Remove the metal plate.

  4. Gently remove the black, rubber gear belt. Discard the old belt responsibly.
    • Gently remove the black, rubber gear belt.

    • Discard the old belt responsibly.

    • Place new belt on.

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

Maegan Viloria

于2015年09月14日注册

651 信誉积分

创作了5篇指南

团队

CSU Fullerton, Team 1-7, Bruce Fall 2015 CSU Fullerton, Team 1-7, Bruce Fall 2015 的会员

CSUF-BRUCE-F15S1G7

3 名成员

创作了6篇指南

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 1

过去的30天: 14

总计 724