简介
Replacing the board holding the GPS, DC in and AV out connectors.
Replacement of the electronic card including the GPS connector, DC IN, and AV out.
你所需要的
-
-
Remove the three screw in red
-
Remove the three long screw in orange
-
Remove the screw in yellow
-
-
-
-
Toggle up the black plate and disconnect the flex cable
-
Toggle up the white plate and disconnect the flex cable
-
Push up the right slide of the connector to free it
-
-
-
Remove the six screws to free the protection plate
-
Disconnect the white cables
-
Disconnect the microphone Cable
-
-
-
Disconnect the speaker cable
-
Remove the two screws to free the PCB
-
Toggle th PCB from Left to Right
-
To reassemble your device, follow the instructions in reverse order.
To reassemble your device, follow the instructions in reverse order.
由衷感谢以下译者:
100%
这些译者帮助我们修补全世界! 您也想加入吗?
开始翻译 ›