修复你的物品 社区 商店

Nikon D5000 Back Panel Replacement

仅作为前提条件
本指南仅用作其他指南的先决条件。不能单独食用。

你所需要的

  1. Nikon D5000 Back Panel Replacement, Back Panel: 步骤 1 中的图像 1，3 Nikon D5000 Back Panel Replacement, Back Panel: 步骤 1 中的图像 2，3 Nikon D5000 Back Panel Replacement, Back Panel: 步骤 1 中的图像 3，3

    • The battery door has been removed for clarity, but is not necessary. See this guide for how to remove it.

    • Unscrew the eight Phillips #00 screws on the back panel:

    • Two 2.5x6mm screws above the screen.

    • One 3x6mm screw on the upper part of each side (two total; right side shown).

    • One 3x7.5mm screw on the lower part of each side (two total).

    • Two 3x4.5mm screws on the bottom.

    编辑

  3. Nikon D5000 Back Panel Replacement: 步骤 2 中的图像 1，3 Nikon D5000 Back Panel Replacement: 步骤 2 中的图像 2，3 Nikon D5000 Back Panel Replacement: 步骤 2 中的图像 3，3

    • Pull the back panel up, then tilt it back. There will be two cables still holding it on.

    • Doing this will also release the connector cover on the left side. Set it aside for now, but remember to reinstall it later.

    • Disconnect the ribbon cable by flipping the black tab up, then pulling the cable out.

    • This procedure also applies to all of the other ribbon cables in the D5000.

    • Pull out the other connector by lifting it up with tweezers, or by prying it out. Fingernails also work well.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与3其他贡献者

Jacob Rardin

于04/14/14注册

1,390 声望

创作了6篇指南

徽章: 18

+ 15更多徽章

团队

Cal Poly, Team 13-28, Maness Spring 2014 Cal Poly, Team 13-28, Maness Spring 2014 的会员

CPSU-MANESS-S14S13G28

4 名成员

创作了7篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 0

总计 62