跳转到主内容

修复你的物品

维修的权力

配件 & 工具

简介

If your flash has become worn out from use and is not staying down, you might need a new flash housing. Performing this repair does not require a great deal of knowledge of the S9700, but will require a steady hand.

  1. Press the ON/OFF button to power off the S9700. Not doing so can damage the S9700 or cause electric shock.
    • Press the ON/OFF button to power off the S9700.

    • Not doing so can damage the S9700 or cause electric shock.

  2. Place the S9700 upside down Place your finger on the battery compartment cover and gently push toward the front of the S9700. The cover will open up by itself.
    • Place the S9700 upside down

    • Place your finger on the battery compartment cover and gently push toward the front of the S9700.

    • The cover will open up by itself.

  3. Push the yellow tab inside the battery compartment in the direction of the arrow. This will allow the battery to spring up. Push the yellow tab inside the battery compartment in the direction of the arrow. This will allow the battery to spring up. Push the yellow tab inside the battery compartment in the direction of the arrow. This will allow the battery to spring up.
    • Push the yellow tab inside the battery compartment in the direction of the arrow. This will allow the battery to spring up.

  4. Manta 螺丝刀工具包

    日常维修的112个替换头

    Upgrade Your Toolbox

    Manta 螺丝刀工具包

    Upgrade Your Toolbox
  5. Grab the battery and pull out. Grab the battery and pull out.
    • Grab the battery and pull out.

  6. Place your fingernail or a plastic opening tool in the space between the camera housing and the flash housing. Carefully pry up on the flash housing. It will pop up automatically. Carefully pry up on the flash housing. It will pop up automatically.
    • Place your fingernail or a plastic opening tool in the space between the camera housing and the flash housing.

    • Carefully pry up on the flash housing. It will pop up automatically.

  7. Remove the two 4-mm J000 screws positioned at the bottom of the flash housing. The housing will now be hanging only by the ribbon supplying power. The housing will now be hanging only by the ribbon supplying power.
    • Remove the two 4-mm J000 screws positioned at the bottom of the flash housing.

    • The housing will now be hanging only by the ribbon supplying power.

  8. Using your fingers or plastic opening tool, remove the back half from the front half of the flash housing. The front half will stay on. Sudden or large force can rip the flash power supply off. Sudden or large force can rip the flash power supply off.
    • Using your fingers or plastic opening tool, remove the back half from the front half of the flash housing. The front half will stay on.

    • Sudden or large force can rip the flash power supply off.

  9. Place a plastic opening tool on the clear lens of the flash. Gently push on the lens to remove the front half of the flash housing. Gently push on the lens to remove the front half of the flash housing.
    • Place a plastic opening tool on the clear lens of the flash.

    • Gently push on the lens to remove the front half of the flash housing.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Matt Staubus

于2016年10月05日注册

774 信誉积分

创作了5篇指南

团队

USF Tampa, Team 9-5, Lacy Fall 2016 USF Tampa, Team 9-5, Lacy Fall 2016 的会员

USFT-LACY-F16S9G5

4 名成员

创作了5篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 3

过去的30天: 18

总计 561